User manual

Chapter 2: Basic Checkout
Switching the Unit Off (Suspend)
12 NEO Hand-Held with Windows Mobile 6.1 User Manual
•Insert a charged battery into the unit, making certain that the connectors on the battery
are aligned with those in the NEO battery compartment.
• Replace the battery cover, and snap it into place.
To switch NEO on:
• Press and hold down the [ENTER] key for at least one second.
• When the LED flashes green, release the [ENTER] button.
The desktop screen is displayed.
2.2.2 Switching the Unit Off (Suspend)
•Press the [FN/BLUE] key, and then press the [ENTER] key.
2.3 Connecting NEO to a PC
NEO can be connected to a PC using the desktop docking station.
• Insert the unit in the desktop docking station.
• Use a Client USB connector to complete the communication link between the hand-held
and the PC.
2.4 Wireless Networking – Wi-Fi Config
NEO contains an integrated 802.11b/g radio module. The Wi-Fi Config application is used
to configure NEO for one or more wireless network profiles. A network profile contains set-
tings for SSID (Service Set Identifier) and security options.
Note: If you are using a docking station or an external power supply, you can insert an
uncharged battery, dock the unit and switch it on.
Note: If the unit was already in use – the unit may be off (suspend state) – pressing
[ENTER] ‘wakes’ the unit from this state. The screen in which you were working
prior to the suspend state is displayed.
Note: Refer to “Linking a NEO to a PC” on page 220 for more details about the desktop
docking station and how to link to a PC.
Note: In most situations, the configuration of your 802.11 radio will require parameter set-
ting and access keys from a network administrator.