User manual

C-2 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanner
C.2 Decoded (Internal) Scanner
C.2.1 Options – Decoded (Internal) Scanner
Dot Time (msec)
The value selected for “Dot Time (msec)” determines (in milliseconds) how long the target-
ing dot remains on before the scanner switches to a normal scan sweep. When you double-
tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec,
200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 5 and 99, measured in tenths of a second.
C.2.2 Advanced Options – Decoded (Internal)
Scan Mode
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
scanning mode: Scan beam only, Aim with Scan: 1 trigger pull, Aim with Scan: 2 trigger
pulls, Aim with Scan on trigger release, and Continuous Scan Mode.