User manual

Appendix B: Teklogix Imagers Applet
Selecting a Camera
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual B-9
Figure B.2 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified as
follows:
• Predefined presets are marked as read-only. For a description, review “Predefined Pre-
sets” on page B-2.
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
The top portion of the window displays the bar code decoding camera presets.
B.4.1 Selecting a Camera
To select a camera:
• Tap on the Camera Presets drop-down menu to view the camera options.
• Choose a camera – specifically, Front Imager which is located at the top of the unit.
B.4.2 Setting the Active Preset
An active preset has an A to the right; in Figure B.2 on page page B-9, the active preset is
Defaults. To set an active preset:
• Highlight the preset, and tap on the Activate button.
Note: The top portion of the window displays the bar code decoding camera presets.