User manual

Chapter 8: Specifications
NEO Radio Specifications
232 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
8.2 NEO Radio Specifications
8.2.1 802.11b/g Radio
Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division
Multiplexing (OFDM)
• Form factor: Embedded surface mount module, 8.2 x 8.4 mm
• Antenna port: U.FL jack
• Antenna Type: PCB slot antenna
• Antenna Gain: 2dBi peak
• Transmit Power: 802.11b/g: 50 mW typical (+17 dBm)
• Frequency Range: 2.400 - 2.4835 GHz
• Channels: This radio supports 802.11d. The radio will associate with any 802.11d com-
pliant AP, regardless of what channel is in use.
• RX Sensitivity:
-86 dBm typ @ 11 Mbps
-82dBm @ 6 Mbps, -69 dBm @ 54 Mbps
• Data Rates:
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
•EVM
802.11b: -28 dB typ (16%)
802.11g: -29 dB typ (13%)
• Bluetooth Co-existence: 2-line hardware handshake with Bluetooth radio
8.2.2 Bluetooth Radio
• Form Factor: Embedded (920 kbps serial interface)
• Bluetooth Version: Version 2.0 compliant – features Adaptive Frequency Hopping
(AFH) for better co-existence with 802.11 radio and Enhanced Data Rate (EDR) for up
to 3 Mbps data rate
• Antenna Type: Ceramic chip PIFA
• Antenna Gain: 1 dBi peak
• Transmit Power: -3 dBm (0.5mW) minimum, +4 dBm (2.5 mW) max