User manual

Chapter 7: Peripheral Devices & Accessories
Installation – Docking Stations
216 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
7.4.1 Installation – Docking Stations
When installing a docking station, consider the following guidelines.
• Keep docking stations away from excessive dirt, dust and contaminants.
• Docking stations will not charge batteries outside an ambient temperature range of 0 °C
to 45 °C (32 °F to 113 °F). It is recommended that the docking station be operated at
room temperature—between 18 °C and 25 °C (64 °F to 77 °F) for maximum
performance.
After unpacking your unit:
• Visually inspect the docking station for possible damage.
• Install the IEC power cord and apply power.
7.4.2 Power Consumption Considerations
Check to ensure the mains circuit supplying docking stations is adequate for the load, espe-
cially if several docking stations are being powered from the same circuit.
• Quad docking station – can consume up to 3A @ 120VAC or 1.5A @ 240VAC.
7.4.3 Operator Controls
NEO docking stations have no operator controls or power switches.
7.5 Desktop Docking Station – PX3001
Figure 7.9 Desktop Docking Station
Connector
Tri-coloured
LED
Pins
Spare Battery
Charge Well