User manual

Chapter 7: Peripheral Devices & Accessories
Adaptor/Cable Options
212 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
7.3 Adaptor/Cable Options
The following are adaptors that can be ordered for NEO:
7.3.1 RS-232 Adaptor – Model No. PX3050
This adaptor is equipped with an RS-232 port via a standard non-powered DB9 connector.
Carrying devices such as the wrist strap can still be used when the adaptor is attached to the
hand-held.
To attach the adaptor to NEO:
• Make certain that the adaptor connector and NEO docking port are free of dust or any
other debris before connecting them.
• A slot on the side of the adaptor is provided to accommodate the carrying strap. Thread
the carrying strap through the slot on the adaptor. (Refer to Figure 7.8 on page 213.)
Table 7.2 Adaptor/Cable Model Numbers And Descriptions
Model Number Adaptor/Cable Description
PX3052 Cable/Dongle – Micro-USB to Ethernet
PX3053 Cable – Micro-USB to USB ‘A’ Receptacle
PX3058 Cable – Micro-USB to USB ‘A’
PX3050 Adaptor – Hand-Held to RS232 Connector
PX3054 Adaptor – Hand-held to Micro-USB with DC Jack
PX3056 Adaptor – Cigarette Lighter
RS-232 Port
Slot to Accommodate
Carrying Strap