User manual

Chapter 6: Settings
Changing Network Card Settings
196 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
• If necessary, use a network cable to connect the network card to your network. Refer to
the documentation shipped with your network card for details.
• To activate the connection, launch the desired program (e.g., Internet Explorer). NEO
will connect automatically.
6.40.4 Changing Network Card Settings
• If you use your network card in two locations like work and home, you’ll need to
change the network to which the network card connects.
• Tap on Start>Settings>Connections>Network Cards.
•In the Configure Network Adapters dialog box, tap on the drop-down menu below My
network card connects to, choose either The Internet or Work.
6.40.5 VPN Connection Setup
A VPN connection provides a secure connection to servers through the Internet.
Before you begin, you need the following information from your network administrator:
password, domain name, TCP/IP settings and a host name or IP address of the VPN server.
• Tap on Start>Settings. Tap on the Connections tab followed by the Connections icon.
• Under My Work Network, tap on Add a new VPN server connection.
•In the Name field, type a name for this connection.
• In Host name/IP, type the VPN server name or IP address.
Note: Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.