User manual

Chapter 6: Settings
The Bluetooth GPRS Phone
186 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
HCI Version & LMP Version display the version of the chip firmware.
Component indicates the version of the Psion Teklogix Bluetooth Subsystem (the manager,
drivers, etc).
Profiles lists the supported profiles on this specific NEO.
6.37.6 The Bluetooth GPRS Phone
Once you’ve completed the Bluetooth settings, you can go ahead and set up communication
through your Bluetooth-equipped phone.
Before you begin, make certain that the Bluetooth phone is turned on, that the Bluetooth
radios in NEO and your phone are enabled (turned on), and that the hand-held and phone are
within 10 metres of each other. Both should be discoverable.
1. Tap on Start>Settings, and then tap on the Connections tab.
2. Tap on the Connections icon. Tap on Add a new modem connection.
3. Type a name for the connection.
4. Tap on the Select a modem drop-down menu, and choose Bluetooth. Tap on Next.
5. Make certain that the phone is discoverable. Some phones also need to be pairable
in order to accept a bonding request. Refer to your phone documentation for addi-
tional information.
6. If the phone appears in the My Connections list, skip to step 13.
7. In the list, tap the phone and then tap on the Next button.
8. In the PIN screen, type a personal identification number (PIN) – you can enter up to
16 characters.
9. Enter the same PIN on the phone.