User manual

Chapter 6: Settings
Device Tab
182 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Refresh Name repeats the device name inquiry, updating the name. This command is useful
if a device is listed without a name (unknown), or if a device name has been changed
remotely.
Delete removes this device from the list.
6.37.2.4 Pairing a Device
To pair devices:
• Follow the manufacturer’s instructions to place the remote device in pairing mode.
• Choose the Devices tab and Scan for devices in your area.
• When the scan is complete, tap on the device to which you want to pair.
• In the pop-up Device menu, tap on Pair.
An Authentication dialog box is displayed.
• If the remote device has authentication enabled, type the PIN in this dialog box.
• To proceed without authentication, tap on Next.
Note: If a remote device has authentication enabled and you’ve skipped the authentication
process, a pop-up screen will ask if you want to allow the remote device to connect to
NEO. Tap on Yes and type the PIN. When authentication is complete, tap on Done.