User manual

Chapter 6: Settings
Teklogix Imagers Settings
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual 155
6.30 Teklogix Imagers Settings
The Teklogix Imagers applet is used to create, modify, delete and activate imager settings.
The principal uses of the applet are to decode bar codes and to capture images.
To launch this applet:
• Tap on Start>Settings>System tab, and then tap on the Teklogix Imagers icon.
6.30.1 Imager Demo
An Imager demo applet is also provided to illustrate how the imager works.
Note: This icon is only displayed when the appropriate imager is installed in your
hand-held.
Important: Refer to Appendix B: “Teklogix Imagers Applet” for details about this
applet.