User manual

Chapter 6: Settings
Trigger Mappings
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual 143
6.22.1.1 Add and Edit Trigger Mapping
• Tap on Add to add a new trigger map, or tap on Edit to edit an existing trigger map.
Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Ex-
pansion port trigger, Soft Scan and Scan for the trigger module selected.
Add Key
Only existing trigger sources are shown in the Source combo-box. To add a new source to
this list, tap on the Add Key button. A dialog box pops up, allowing you to select the key-
board key to use as a trigger source.
Note: It is possible to map the same source to different modules (trigger consumers—for
example, to both the Imager and Decoded Scanner. If so, both devices/operations
will occur simultaneously. This is not recommended in most cases, especially with
devices such as Imagers or RFID Readers.
It is also possible to map different sources to the same module (trigger consumer).