User manual

Chapter 5: Programs
Using Internet Sharing
90 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
• Tap on Start>Settings>Connections tab. Tap on the Connections icon.
• Under My Work Network, tap Add a new modem connection.
• Type a name for the connection, and choose Cellular Line (GPRS), or for 1xRTT con-
nections, choose Cellular Line. Tap on Next.
• Type the phone number or access point name provided by your service provider, and
tap Next.
• Type the credentials supplied by your service provider, and tap Finish.
5.10.2 Using Internet Sharing
• Make certain that your data connect is running, and that you can access the Internet
from NEO.
If you are using a USB cable to connect to your PC, you will need to disable the ActiveSync
USB connection.
• On your PC, open the ActiveSync window, and click on File>Connection Settings.
•Disable Allow USB connection by clicking in the checkbox to the left of this option.
• Connect NEO to your PC using Bluetooth or a USB cable.
• On NEO, tap Start>Programs>Internet Sharing.
• Choose the PC Connection type – USB or Bluetooth.
• Choose the network connection that NEO should use to connect to the Internet.
•Tap Connect. It takes approximately 30 seconds to establish a connection. (If you are
prompted to turn on Bluetooth, tap Ye s.)
If your are using a Bluetooth connection, execute the following steps on your PC:
•Click Start>Control Panel>Network Connections.
• Right-click on Bluetooth Network Connections, and click on View Bluetooth
Network Devices.
• If NEO is listed as a Network Access Point, click Connect. If it is not listed, click
Create a new connection and use the New Connection Wizard to add NEO to the list.