User manual

BC-80X0 Default Configuration
Quick Reference Guide 17
BC-80X0 Default Configuration
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays
disabled, USB keyboard speed normal.
DATA FORMAT: code identifier disabled, code length not transmitted,
character replacement disabled, reader and cradle address stamping
disabled, reader and cradle address delimiter disabled, time stamping
disabled, time stamping delimiter disabled, no header, terminator =
ENTER.
RS-232 DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, ack/nack
protocol disabled, FIFO enabled, delay disabled, 5 sec. rx timeout
DATA FORMAT: code identifier disabled, code length not transmitted,
character replacement disabled, reader and cradle address stamping
disabled, reader and cradle address delimiter disabled, time stamping
disabled, time stamping delimiter disabled, no header, terminator = CR-
LF.
WEDGE DEFAULT SETTINGS
USA keyboard, Caps Lock off, Caps Lock Auto-Recognition enabled,
num lock unchanged, inter-character and intercode delay disabled,
control character emulation = ctrl+shift+key.
DATA FORMAT: code identifier disabled, code length not transmitted,
character replacement disabled, reader and cradle address stamping
disabled, reader and cradle address delimiter disabled, time stamping
disabled, time stamping delimiter disabled, no header, terminator =
ENTER.
PEN DEFAULT SETTINGS
Interpret operating mode, conversion to code 39, output level normal,
idle level normal, minimum output pulse 600s, overflow medium, inter-
block delay disabled.
NETWORK PARAMETERS
RS-485 network disabled (for BC-8000 only).