User manual

BC-80X0 Configuration
Quick Reference Guide 11
BC-80X0 Configuration
BC-80X0 configuration can be performed in two ways:
• by sending configuration strings from the Host PC via the RS-232 or
USB-COM interface
- OR -
• by reading configuration bar codes with the PowerScan™ M reader.
Serial Configuration
By connecting the BC-80X0 to a PC through an RS-232 or USB-COM
interface cable it is possible to send configuration strings from the PC
to BC-80X0.
Configuration Bar Codes
Once you have performed system connection and PowerScan™ M
reader configuration, you can configure the BC-80X0 cradle by reading
configuration bar codes. Apply power to the BC-80X0.
For PowerScan™ M configuration, refer to the “PowerScan™ M8300
Quick Reference Guide”.
To configure the BC-80X0 using the PowerScan™ M reader (the one
paired to the cradle with the Bind command), follow the procedure
according to the interface selected.
Restore Default
Scan the bar code below to restore the BC-80X0 to its default
configuration settings. See "BC-80X0 Default Configuration" on page 17
for more information.
Restore BC-80X0 default
Ì$+RX0$-qÎ
To change the defaults, refer to the "PowerScan
™
D8330/M8300 User
Manual", downloadable from the website.