User manual

PSION
8PowerScan™ M8300
Applying Rapid Point-to-Point Configuration Label (Optional)
System Connections
The BC-80X0 cradle provides two interface connectors and a power
supply connector as shown in the figure below:
The RS-485 Network connection is available only on BC-8060 models.
For details about this type of connection, refer to the PowerScan™
D8330/M8300 User Manual.
To connect the BC-80X0 cradle to the Host through the multi-interface
connector, use the cable corresponding to the desired interface type.
A pre-printed bar code label is included
in the package for rapid configuration of
point-to-point applications. If you wish
to use this method, apply this label to
the seat provided on the BC-80X0
cradle as shown in the figure. See the
PowerScan™ M8300 Quick Reference
Guide for the configuration procedure.
Connections should always be made with power off!
CAUTION
Power
Supply
RS-485
(BC-8060 only)
MULTI-INTERFACE
RS-232, USB, Wedge, PEN
Emulation