netpad Windows CE .NET 4.2 User Manual June 1, 2004 P/N 8000021.
© Copyright 2004 by Psion Teklogix Inc., Mississauga, Ontario, Canada This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services.
Return-To-Factory Warranty Psion Teklogix warrants a return-to-factory warranty for a period of one year. In some regions, the warranty exceeds this period. Please contact your local Psion Teklogix office for details. For a list of offices, please refer to Appendix A: “Support Services And Worldwide Offices”.
TABLE OF CONTENTS Program License Agreements . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Approvals And Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Chapter 1: Introduction 1.1 1.2 1.3 1.4 1.5 About This Manual . . . . . . . . . . . . . . . . . Text Conventions . . . . . . . . . . . . . . . . . . Software. . . . . . . . . . . . . . . . . . . . . . . 1.3.1 Windows CE .NET . . . . . . . . . . . . . 1.3.2 Applications Installed On The netpad . . . 1.3.
Contents 2.3.2.2 Internal Battery . . . . . . . . . 2.3.2.3 Power Saving Schemes . . . . . 2.3.2.4 Battery Settings . . . . . . . . . 2.3.2.5 Device Status . . . . . . . . . . 2.3.3 Flight Mode Settings . . . . . . . . . . . 2.4 Multimedia Cards . . . . . . . . . . . . . . . . . 2.4.1 Inserting And Removing An MMC. . . . 2.5 Installing And Removing The SIM Card . . . . . 2.5.1 Inserting The SIM Card. . . . . . . . . . 2.5.2 Removing The SIM Card . . . . . . . . . 2.6 Turning On And Off . . . . . . . . . . .
Contents 3.2.2 Pins And Connections . . . . . . . . . . . . . . . . . . . . . . 46 Chapter 4: Configuring The netpad 4.1 4.2 4.3 Things To Do First . . . . . . . . . . . . . . . . . . . . . 4.1.1 Screen Rotation. . . . . . . . . . . . . . . . . . . 4.1.2 Entering Owner and Password Information . . . . 4.1.3 Setting The Time, Date And Time Zone . . . . . . Things To Do Next . . . . . . . . . . . . . . . . . . . . . 4.2.1 Setting Up ActiveSync . . . . . . . . . . . . . . . 4.2.1.1 Partnerships . . . . .
Contents 4.3.3 4.3.2.12 Discrete 2 Of 5 . . . . . . . . . . . . . . . . . . . . 77 Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Chapter 5: Files, Folders, And Programs 5.1 5.2 5.3 5.4 5.5 Introduction . . . . . . . . . . . . . . . . . . . . . . . Moving Around . . . . . . . . . . . . . . . . . . . . . Opening Files, Folders And Programs . . . . . . . . . Closing Programs/Files . . . . . . . . . . . . . . . . . Creating New Folders . . . . . . . . . . . . . . . . . . 5.5.
Contents 6.5 6.6 6.4.1 Looking At Files On Your netpad . . . 6.4.2 Copying A File Using Drag And Drop. 6.4.3 Copying A File Using Copy And Paste 6.4.4 Opening netpad Files From Your PC. . Backing Up Your netpad With ActiveSync . . . 6.5.1 Performing Your First Backup . . . . . 6.5.2 Performing Regular Backups. . . . . . Synchronizing Your netpad . . . . . . . . . . . 6.6.1 What Is Synchronization? . . . . . . . 6.6.2 Synchronizing Your netpad . . . . . . 6.6.2.1 Creating The Partnership. . . 6.6.
Contents 7.5.1 7.5.2 7.5.3 Overview . . . . . . . . . . . . . . . . . . . . . . . . . 7.5.1.1 Using The Internet On netpad . . . . . . . . . 7.5.1.2 Using E-mail On netpad . . . . . . . . . . . . 7.5.1.3 Types Of E-mail Account. . . . . . . . . . . . 7.5.1.4 If You Don’t Have An Internet/E-mail Account 7.5.1.5 Glossary Of Terms . . . . . . . . . . . . . . . Setting Up Your netpad . . . . . . . . . . . . . . . . . . 7.5.2.1 How To Use Internet Explorer/Inbox. . . . . . 7.5.2.2 Getting Help . . . . . . . .
Contents 9.1.3 9.1.4 9.1.5 9.1.6 9.2 9.3 The netpad Doesn’t Turn On/Off. . . . . . . . . . . . . Resetting The netpad . . . . . . . . . . . . . . . . . . . Can’t Place The netpad In The Docking Station . . . . . Battery Life Of The netpad Variants . . . . . . . . . . . 9.1.6.1 Usage Scenarios . . . . . . . . . . . . . . . . 9.1.6.2 Charging Times . . . . . . . . . . . . . . . . 9.1.6.3 Battery Charging Without A Docking Station . ActiveSync Connection Problems Using Windows® 95/98/NT 4.0 . . . . . . . .
Contents Appendices Appendix A: Support Services And Worldwide Offices A.1 A.2 A.3 A.4 Index viii Technical Support . Product Repairs . . WorldWide Offices. World Wide Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 .A-1 .A-2 .A-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROGRAM LICENSE AGREEMENTS MICROSOFT® END USER LICENSE AGREEMENT You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
Program License Agreements WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. x • Note on Java Support. The SOFTWARE may contain support for programs written in Java.
Program License Agreements CISCO END USER LICENSE AGREEMENT EXHIBIT C MINIMUM TERMS AND CONDITIONS 1. Each end user license agreement shall contain terms that are legally sufficient to: i. Authorize the end user to make one copy of the Driver Software for backup purposes only; ii. Prohibit further copying and/or transfer of the software included in the Cisco Adapter or Driver Software; iii.
Program License Agreements iv. The limitation of liabilities described in this section also apply to any third-party supplier of materials supplied to licensor. The limitations of liabilities of License and its third-party supplier are not cumulative. Such third-party supplier is an intended beneficiary of this section. v. The software included in the Cisco Adapter and Driver Software was developed at private expense and that if licensed to the US government it is licensed only with restricted rights. vi.
APPROVALS AND SAFETY SUMMARY DECLARATION OF CONFORMITY Product: netpad 1000 Series with Serial Docking Station Application of Council Directives: EMC Directive: 89/336/EEC Low Voltage Directive: 73/23/EEC Conformity Declared to Standards: EN 55022: 1998; Class B; EN 55024: 1998; EN 61000-4-2; ±4kV CD; ±8kV AD EN 61000-4-3; 3V/m, 80-1000 MHz, 900 MHz EN 61000-4-4; ±1kV Power lines EN 61000-4-5; ±2kV Common; ±1kV Differential mode EN 61000-4-6; 3VRMS, 150 kHz-80 MHz EN 61000-4-11; AC Mains Ports EN 61000
Approvals And Safety Summary DECLARATION OF CONFORMITY Product: netpad 3000 Series with Serial Docking Station Application of Council Directives: EMC Directive: 89/336/EEC Low Voltage Directive: 73/23/EEC Conformity Declared to Standards: EN 55022: 1998; Class B; EN 55024: 1998; EN 61000-4-2; ±4kV CD; ±8kV AD EN 61000-4-3; 3V/m, 80-1000 MHz, 900 MHz EN 61000-4-4; ±1kV Power lines EN 61000-4-5; ±2kV Common; ±1kV Differential mode EN 61000-4-6; 3VRMS, 150 kHz-80 MHz EN 61000-4-11; AC Mains Ports EN 6100
Approvals And Safety Summary FCC INFORMATION FOR THE USA FCC DECLARATION OF CONFORMITY (DOC) Applicant’s Name & Address: PSION TEKLOGIX 2100 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 7J9 Telephone No.: (905) 813-9900 US Representative’s Name & Address: Psion Teklogix Corp. 1810 Airport Exchange Blvd., Suite 500 Erlanger, Kentucky, 41018, USA Telephone No.: (859) 371-6006 Equipment Type/ Environment Use: Computing Devices for Home and Office Use Trade Name / Model No.
Approvals And Safety Summary CE MARKING When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfill all requirements for CE marking. R&TTE DIRECTIVE 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.
Approvals And Safety Summary Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com). Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). L Use of the 802.11b netpad in France: Owing to French Government restrictions, the French 802.
Approvals And Safety Summary For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the US Government Printing Office, Washington, DC 20402 - Stock No 004-000-00345-4. RADIO FREQUENCY EMISSIONS Do not use in aircraft or hospitals. Some equipment in hospitals and aircraft are not shielded from radio frequency energy.
Approvals And Safety Summary IMPORTANT SAFETY INSTRUCTIONS This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the netpad, can be obtained from an authorised Psion Teklogix dealer.
Approvals And Safety Summary BATTERY SAFETY PRECAUTIONS CAUTION! Danger of explosion if a netpad battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions described in “Lithium-Ion Battery Safety Precautions”, below. Carefully review all battery safety issues listed in that section.
Approvals And Safety Summary Warning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to the precautions listed below. • Use only with the authorized Psion Teklogix power adaptor. • Do not dispose of in fire. • Do not incinerate or subject battery cells to temperatures in excess of 100°C (212°F). Such treatment can vaporize the liquid electrolyte causing cell rupture. Incineration may result in harmful emissions or explosion.
Approvals And Safety Summary • Do not continue charging the battery if it does not recharge within the specified charge time. • The battery may burst or ignite if the battery leaks. Always ensure that it is away from any exposed flames. • If a battery should leak, do not allow the contents to come into contact with your skin or your eyes. If it does, wash immediately with plenty of cold water and seek medical advice. • Do not store the battery in extremely high temperatures (e.g.
1 INTRODUCTION 1.1 About This Manual . . . . . . . . . . . . . . . . . 1.2 Text Conventions. . . . . . . . . . . . . . . . . . . 1.3 Software . . . . . . . . . . . . . . . . . . . . . . . 1.3.1 Windows CE .NET. . . . . . . . . . . . 1.3.2 Applications Installed On The netpad . . 1.3.3 About ActiveSync . . . . . . . . . . . . 1.4 Caring For The netpad . . . . . . . . . . . . . . . . 1.5 Additional Programs And Third Party Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 .
Chapter 1: Introduction About This Manual 1.1 About This Manual This manual provides information on the operation and features of the Psion Teklogix netpad. For additional information on configuring programs, refer to the Windows CE .NET Help online document by tapping the ? icon located on the top right of the program’s menu bar, or refer to the documentation supplied with the application you are using. The manual references other user documents, where applicable.
Chapter 1: Introduction Text Conventions Chapter 8: netpad Accessories describes the accessories that are available for the netpad, including the Charging solutions, In-vehicle Docking station, and carrying cases. Chapter 9: Troubleshooting And Tips assists in the recognition and correction of problems that you may encounter when operating the netpad and ActiveSync. Includes detailed information on battery use and power consumption.
Chapter 1: Introduction Applications Installed On The netpad 1.3.2 Applications Installed On The netpad The netpad is capable of running a wide variety of applications but the ones available on your particular netpad depend on the purpose for which the netpad is provided. A number of standard applications exist and custom programs can be installed easily. The following standard programs are available: • Wordpad, a word processor for writing letters and other documents.
Chapter 1: Introduction Caring For The netpad 1.4 Caring For The netpad Screen When used with the approved stylus, the netpad screen is very resistant to wear and impact and should last for a considerable time. Use of any object, other than the approved stylus, may result in damage to the netpad screen. To maintain the life of the netpad screen, keep the screen clean. To clean the screen: switch off the netpad and use a soft, clean, dry cloth to gently wipe the screen.
Chapter 1: Introduction Caring For The netpad IP Rating The netpad is rated to IP67 and can survive submersion in water to a depth of 1 m (3.3 ft.) for up to 30 minutes. Submersion below this depth or for longer periods may result in damage to the netpad. Operating Temperature The netpad is designed to operate within the temperature limits of -20°C to +60°C (-4°F to 140°F); and -20°C to +55°C (-4°F to 131°F) for scanner variants. Use of the netpad outside of these temperature limits may reduce its life.
Chapter 1: Introduction Additional Programs And Third Party Applications Magnetic Fields And Static Electricity The magnet of the netpad speaker may corrupt data stored on magnetic media. Do not keep the netpad next to credit cards or other magnetic media. Avoid exposing the netpad to strong magnetic fields or static electricity. Such exposure may cause loss of data or result in damage to the netpad. Service Do not attempt to dismantle the netpad.
2 GETTING STARTED 2.1 Features Of The netpad . . . . . . . . . . . . . . . 2.2 Preparing The netpad For Use . . . . . . . . . . . . 2.2.1 Fitting The Antenna . . . . . . . . . . . 2.2.2 Use Of The Soft Protective Case . . . . 2.3 Power Management . . . . . . . . . . . . . . . . . 2.3.1 Battery Care . . . . . . . . . . . . . . . 2.3.1.1 Fitting The Battery. . . . . . . . . 2.3.1.2 Charging The netpad Battery Pack 2.3.1.3 Changing Battery Packs . . . . . . 2.3.1.4 Battery Life . . . . . . . . . . . . 2.3.1.
2.8.1 Keypad Assignments . . . . . . . . . . . . 2.9 How To Reset The netpad . . . . . . . . . . . . . . . 2.9.1 Performing A Soft Reset (WarmBoot) . . . 2.9.2 Performing A Hard Reset . . . . . . . . . 2.10 The Scanner . . . . . . . . . . . . . . . . . . . . . . 2.11 First Steps . . . . . . . . . . . . . . . . . . . . . . . 2.11.1 Navigating Between Files And Folders . . 2.11.2 Starting Programs . . . . . . . . . . . . . 2.11.3 Programs And Files . . . . . . . . . . . . 2.11.4 Entering Information . . . . .
Chapter 2: Getting Started Features Of The netpad 2.1 Features Of The netpad This netpad is a Windows® CE .NET OS-based mobile tablet computer with a 1/2 VGA touch-sensitive screen. netpad is lightweight, shock and water-resistant, and designed for use in a wide range of business areas including field service, field sales, transport, health care, hospitality, manufacturing and insurance. It is available in variants with internal GSM/GPRS, Bluetooth, and 802.11b radios, and scanners. Figure 2.
Chapter 2: Getting Started Preparing The netpad For Use Scanner Window Figure 2.3 Scanner Location 2.2 Preparing The netpad For Use 2.2.1 Fitting The Antenna Note: This procedure in not necessary for the following netpad models since they house internal antennas within their enclosures: Models 5121, 5122, 5321, 5322, 5521, 5522, 5721, and 5722. For some netpad models fitted with either the GPRS or 802.11b radio, the antenna must be installed. The antenna should be installed as shown in Figure 2.
Chapter 2: Getting Started Use Of The Soft Protective Case 2.2.2 Use Of The Soft Protective Case Figure 2.5 Insertion Of netpad In Case Important: The netpad and protective case have been tested to ensure compliance with the latest FCC RF exposure guidelines. For continued compliance when using the netpad and case combination, the face shown should be fitted against the body! The user must not modify the case in any way. Figure 2.6 Protective Case Position On Body Psion Teklogix netpad Windows CE .
Chapter 2: Getting Started Power Management 2.3 Power Management The netpad is powered by a Lithium Ion rechargeable battery pack, which under optimal operating conditions will provide power for a full shift (for details, see “Battery Life Of The netpad Variants” on page 171). The netpad can be powered from AC when used in the docking station (see page 43). When the netpad is powered from the docking station, it will also charge the battery pack.
Chapter 2: Getting Started Battery Care Battery Contact Pins Battery Pack Direction of Insertion Battery Latch Figure 2.7 Battery Insertion Important: 2.3.1.2 Take care when replacing batteries! The netpad will warn you when its main battery is getting low. The backup battery is designed to maintain the memory for several hours. However, prolonged reliance on the backup battery does reduce its life.
Chapter 2: Getting Started Power Properties 2.3.1.4 Battery Life When your netpad is switched off, it is on “Suspend” and will continue to use a small amount of battery power. If you are going to leave your netpad switched off for a long period of time, you are advised to back up your data beforehand because the batteries will eventually run out. For details on battery usage and life, please refer to “Battery Life Of The netpad Variants” on page 171. See page 14 for steps to take to prolong battery life.
Chapter 2: Getting Started Power Properties System Status Power Icon Description Low Backup (inter- Appears when backup battery voltage is less than 2.500 V. nal) Battery Docked Indicator (netpad connected to power) Appears when netpad is in powered docking station and main battery is fully charged. Disappears when netpad is removed from docking station. Low Main Battery Appears when main battery voltage is between 5% and 15% of configured shutdown threshold.
Chapter 2: Getting Started Power Properties 2.3.2.2 Internal Battery The internal battery provides temporary backup of data on the terminal while the main battery is being replaced. To check the internal battery power status, click on the Internal Battery tab. This screen describes the state of the internal battery, its voltage, and its type. Figure 2.10 Power Properties: Internal Battery 2.3.2.3 Power Saving Schemes The Schemes tab accesses the power states: Dim, Stand-By and Suspend.
Chapter 2: Getting Started Power Properties Note: The Power Properties Schemes settings are cumulative—that is, to determine when the netpad enters ‘Suspend’ state, the unit waits for the ‘Dim’ state to elapse, followed by the ‘Stand-By’ state and then, once the ‘Suspend’ state time has elapsed, ‘Suspend’ state is activated. When setting the Dim, Stand-By, and Suspend states, keep the following in mind.
Chapter 2: Getting Started Power Properties Inactivity Timer Based On Last This parameter allows you to choose what type of event is monitored by Power Management. If you select User Event, the Inactivity Timer for switching into Stand-By or Suspend is started from the last time you press a Navigation button, a function key, or use the touchscreen. “System Events” include activity on the serial port, an active radio session, IrDA activity, or an active application.
Chapter 2: Getting Started Power Properties Figure 2.14 Power Schemes: Dim Switch To Stand-By In Stand-By state (see Figure 2.15), the netpad turns off the display, but the programs and netpad hardware remain active. Stand-By is activated when the time specified in the Switch to Dim and the Switch to Stand-By options have elapsed without any activity. The netpad then begins to monitor the Suspend time. Press the power button to put the netpad into Stand-By state.
Chapter 2: Getting Started Power Properties Switch to Suspend Once the time specified in the Dim and the Stand-By states have elapsed, the netpad begins to count down the time specified in the Switch to Suspend option. When the time in the Suspend option elapses, the unit enters Suspend state. In Suspend state, the netpad CPU suspends all activity, turns off the display, and goes into a low power state. The state of the device (RAM contents) is preserved.
Chapter 2: Getting Started Power Properties 2.3.2.4 Battery Settings This screen allows you to check the current status of the battery and to configure the battery settings so that the netpad will warn you when the main battery charge is low. Figure 2.17 Power Properties: Battery Settings To set the Battery Suspend Threshold, click on the Battery Settings tab. The available settings are set on a sliding scale, and range from 20 to 70%.
Chapter 2: Getting Started Flight Mode Settings Figure 2.18 Power Properties: Device Status 2.3.3 Flight Mode Settings Flight Mode turns off the PCMCIA card in your netpad. This mode serves two purposes. On a radio-equipped netpad, using Flight Mode disables radio communications so that you may use your netpad during an airline flight. On a PCMCIA-equipped netpad, using Flight Mode conserves power when you do not need the features of the card.
Chapter 2: Getting Started Multimedia Cards 2.4 Multimedia Cards Multimedia cards (MMCs) are non-volatile memory cards, which fit into a dedicated slot in the netpad and can be used to store application software and/or data. The MMC slot is located on the right-hand side of the netpad (see Figure 2.20). 2.4.1 Inserting And Removing An MMC • Open the card slot door located on the side of the unit by sliding the retaining latch. Push the MMC into place until it clicks. • Close the door.
Chapter 2: Getting Started Inserting The SIM Card Orientation of netpad (screen side up) MMC SIM Card Card Slot Door Figure 2.21 Location Of SIM Card And MMC Important: The MMC slot and SIM card slot are located very close together. When inserting or removing the SIM card be careful not to drop the SIM card into the MMC slot. 2.5.1 Inserting The SIM Card Warning: 26 To prevent damage to the SIM card, ensure that the netpad is switched off and the battery removed before inserting the SIM card.
Chapter 2: Getting Started Removing The SIM Card MMC SIM Card Orientation of Card (notched corner) SIM Card Slot Figure 2.22 Insertion Of SIM Card Important: Ensure that the SIM card is inserted in the correct orientation as shown. Once inserted, the SIM card can only be removed using a pair of tweezers or long-nosed pliers. If the SIM card is inserted incorrectly, the unit will not connect to the GSM network.
Chapter 2: Getting Started Turning On And Off Cross-hatched Area of SIM Card (grip here with pliers) Orientation of netpad (screen side down) MMC Figure 2.23 Removal Of SIM Card 2.6 Turning On And Off To switch on: press the On/Off button on the top. To switch off: press and hold the On/Off button until the screen goes dark. This suspends the netpad. To simply turn off the display, press the On/Off button once; to turn the display back on, press the On/Off button once more, or tap the screen.
Chapter 2: Getting Started Finding And Using The Stylus 2.7 Finding And Using The Stylus The stylus is located in the netpad, in a holder at the right. To remove it, slide the stylus out of the top of the netpad. To replace it, push it back in. Tap lightly on the screen using the stylus. You can use your fingers to tap, although it is best to use the stylus to avoid fingerprints or smudges on the screen. Do not tap the screen with any object that has a sharp tip or you may damage the screen.
Chapter 2: Getting Started The Command Icons, Control Panel, And Toolbar 2.8 The Command Icons, Control Panel, And Toolbar The netpad screen has a column (touch-strip) of permanent “command icons” on the far right-hand side of the display. Some of these are user-configurable via the Soft Keypad Settings icon in the Control Panel. Figure 2.24 Left-click And Right-click Soft Keys Assignments From top to bottom, these are the defaults for the soft keys: Menu: This icon is user-definable.
Chapter 2: Getting Started Keypad Assignments Explorer: This icon is user-definable. Left-clicking displays Windows Explorer. Rightclicking displays Internet Explorer. Keyboard: Left-clicking displays the Software Input Panel (SIP), the on-screen keyboard. Right-clicking is inactive. System command icon: Left-clicking displays the Windows CE Start Menu. Right-clicking displays the Soft Keypad Settings menu (see Figure 2.24 on page 30), which is also accessed through the Control Panel. Figure 2.
Chapter 2: Getting Started How To Reset The netpad Figure 2.26 Navigation Keys Settings 2.9 How To Reset The netpad If you find that you can’t exit a program normally, right-click on the taskbar and select Task Manager from the context menu. Select the task that appears to be unresponsive and click on the End Task button. If this does not work, or your netpad appears to have “locked up”, you can perform a “soft reset”. This should restart your netpad while preserving most of your information.
Chapter 2: Getting Started Performing A Hard Reset MMC SIM Card Reset Button Figure 2.27 Reset Button Location After a soft reset, any changes to open files will be lost. Your other files on the internal disk will almost always be safe. It is possible (although unlikely) that performing a soft reset after a program failure may cause the netpad to lose the information on the internal disk; it could even prevent the reset from working at all. If this happens, you will have to perform a “hard reset”.
Chapter 2: Getting Started The Scanner 2.10 The Scanner Where fitted with a bar code scanner, the netpad may be used to read industry standard bar codes. To scan a bar code, point the scanner window at the bar code, ensuring that the scanner window is not obstructed and that you are between 5 cm (2 in) and 60 cm (24 in) from the bar code. Activate the scanner as instructed in the software application’s operating instructions.
Chapter 2: Getting Started First Steps 2.11 First Steps When you first switch on the netpad, you will see the Calibration screen. You must calibrate successfully to continue. After calibration, you will see the Time/Date menu. Input the correct time, date, and time zone (always select the time zone and apply it before setting the time and date). Click the OK button in the Time/Date menu to close and save your changes. You will then see the Windows Desktop. 2.11.
Chapter 2: Getting Started Programs And Files 2.11.3 Programs And Files To create a new file: open the program, select the New command on the File menu and type in the name for the new file (see “Entering Information”, below). The file will now be created. You can start entering your information. It is a good idea to keep related files together in a folder, to make the files easier to find later. 2.11.
Chapter 2: Getting Started Using Menus The dropdown menu will show all available keyboards. Clicking on the Options button will let you set such preferences as button size and special gestures for use with the keyboard. Note: You can quickly access the keyboard language options by clicking on the keyboard icon in the netpad’s taskbar. Keyboard icon 2.11.5 Using Menus You can usually select a menu command to perform tasks. • Click on the menu you want to access from the menu bar.
Chapter 2: Getting Started Using Dialogues 2.11.6 Using Dialogues A “dialogue” appears when you need to make selections and enter further information. You can move between dialogue items by clicking on them, or using the up and down arrow keys. Dialogues contain one or more of the following elements: Textbox: where you just type in your information. When you tap in the textbox, you will need to open the on-screen keyboard to enter text. Dropdown: where you select from a number of options.
Chapter 2: Getting Started Copying Information Between Programs Tabs in dialogue page Checkbox Dropdown box Figure 2.29 Dialogue Pages 2.11.6.1 Dialogue Buttons Dialogues usually include standard buttons such as Ok and X. Some buttons have a standard keypress equivalent: • Usually, you can click on the OK button or press the Enter key if you want to save information and remove the dialogue.
DOCKING STATION AND SERIAL PORT 3.1 Using The Docking Station . . . . . 3.1.1 Communications Settings 3.2 Serial Pinouts And Cables . . . . . . 3.2.1 Serial Port Pinout . . . . 3.2.2 Pins And Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . 43 . . . . . . . 44 . . . . . . . . 45 . . . . . . . 45 . . . . . . . 46 Psion Teklogix netpad Windows CE .NET 4.
Chapter 3: Docking Station And Serial Port Using The Docking Station 3.1 Using The Docking Station The netpad docking station provides a permanently connected “drop-in” holder for the netpad, supplying power for device operation, battery charging, and communications. The power jack is on the front and the serial communication sockets are situated at the right of the docking station. The connector to the netpad faces upwards from the middle of the station.
Chapter 3: Docking Station And Serial Port Communications Settings While the netpad is in the docking station, the communications port on the netpad can still be used. The docking station communications port is also available for convenience. You can rotate the orientation of the docking station on its stand. Hold the top of the docking station in one hand and the bottom in the other. Lift the top part to release it and rotate through 90°. When you let go of the top part, it will click into place. 3.1.
Chapter 3: Docking Station And Serial Port Serial Pinouts And Cables ActiveSync icon 3.2 Serial Pinouts And Cables 3.2.1 Serial Port Pinout The pinouts are the same for the serial port on the docking station and on the netpad. Looking at the side of the netpad with the screen facing up, or at the docking station upside-down, the following diagram shows the sequence of the pin numbers: 5 4 3 2 1 10 9 8 7 6 Connector / Front view into device Note: There is a polarizing notch above pin 3.
Chapter 3: Docking Station And Serial Port Pins And Connections 3.2.2 Pins And Connections netpad Pin 1 netpad Function TXD 9-way D Pin 9-way D Function Wire Colour 2 RXD black 2 RTS 8 CTS brown 3 Ground 5 Ground red 4 DSR 4 DTR orange 5 CTS 7 RTS yellow 6 3.3 volts not connected 7 DTR 1 and 6 DCD, DSR blue 8 RXD 3 TXD purple 9 DCD 4 DTR grey 10 7.2 volts not connected green not connected white shell drain wire Table 3.
Chapter 3: Docking Station And Serial Port Pins And Connections Pin Function 1 DCD 2 RXD 3 TXD 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI Table 3.3 Standard 9-way D-plug RS-232 Pins Psion Teklogix netpad Windows CE .NET 4.
CONFIGURING THE NETPAD 4 4.1 Things To Do First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.1.1 Screen Rotation . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.1.2 Entering Owner and Password Information . . . . . . . . . 52 4.1.3 Setting The Time, Date And Time Zone . . . . . . . . . . . 52 4.2 Things To Do Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.2.1 Setting Up ActiveSync . . . . . . . . . . . . . . . . . . . . 53 4.2.1.1 Partnerships . . . . . . . . .
4.3.2.7 UPC E . . . . . . . 4.3.2.8 Codabar . . . . . . 4.3.2.9 Code 93 . . . . . . 4.3.2.10 Interleaved 2 Of 5. 4.3.2.11 MSI Plessey . . . . 4.3.2.12 Discrete 2 Of 5 . . 4.3.3 Translations. . . . . . . . 50 Psion Teklogix netpad Windows CE .NET 4.2 User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4: Configuring The netpad Things To Do First 4.1 Things To Do First This section describes what you may need to do to set up your netpad: • Customize the screen rotation of the netpad. • Enter owner information in the Owner Properties menu, so that your netpad can be returned if you lose it. • Set a password for your machine, so that other people cannot access your information. • Set the current time and date. 4.1.
Chapter 4: Configuring The netpad Entering Owner and Password Information 4.1.2 Entering Owner and Password Information It is a good idea to enter “owner information”, so that if the netpad is lost, it can be returned when found: 1. Select the Owner icon from the Control Panel. Fill in all the fields on the Identification tab. Click OK to save your information. 2. Select the Password icon from the Control Panel. Enter a password in the first textbox and confirm it by typing it again in the second textbox.
Chapter 4: Configuring The netpad Things To Do Next 4.2 Things To Do Next This section gives a brief overview of what else you may want to do when you first use your netpad. 4.2.1 Setting Up ActiveSync ActiveSync allows you to connect the netpad to a PC serially, or through Infrared or radio communication. File transfers, file synchronization and sending e-mail can all be done via ActiveSync. ActiveSync must be connected serially at least once before other connection types are possible.
Chapter 4: Configuring The netpad Setting Up ActiveSync 4.2.1.1 Partnerships There are two types of connection provided for by ActiveSync: 1. Guest - A guest connection allows file transfers. No synchronization is performed. If the netpad is password protected, the password prompt will appear when connecting as guest. 2. Partnership - A partnership connection allows for synchronization of files, e-mail and other data.
Chapter 4: Configuring The netpad Setting Up ActiveSync 4.2.1.2 Connecting With Infrared (IrDA) To connect using ActiveSync via Infrared, a partnership must already be established between the PC and the netpad (see “Creating The Partnership” on page 103). 1. On the PC, open ActiveSync and go to the Connection Settings screen. The first checkbox concerns both serial and IrDA connections. Set the dropdown to use the Infrared connection. The netpad supports Fast IrDA. 2.
Chapter 4: Configuring The netpad Connecting netpad To The PC Using ActiveSync Important: You must have a correctly configured access point to use 802.11b Ethernet to access your PC via ActiveSync. The PC and the netpad must be on the same network, or networks that have access to each other, for this to function correctly. 4.2.2 Connecting netpad To The PC Using ActiveSync 1.
Chapter 4: Configuring The netpad Connecting netpad To The PC Using ActiveSync • Docking Station specifies using the RS-232 communications port on the docking station. • Infrared Port specifies using the IR port on the back of the netpad. The AutoLaunch ActiveSync checkbox enables the netpad to launch ActiveSync when it is seated in a docking station that is connected to an ActiveSync server. The ActiveSync icon appears in the netpad’s taskbar when AutoLaunch is enabled. ActiveSync icon 5.
Chapter 4: Configuring The netpad Backing Up To Multimedia Cards 4.2.3 Backing Up To Multimedia Cards You can back up individual files, individual folders or groups of files and folders to a multimedia card fitted in the multimedia card (MMC) slot. To back up the files and folders, copy them from the internal disk to a multimedia card using the Copy and Paste commands in the System screen. 1. Select the files and folders you want to back up, then select the Copy command from the Edit menu. 2.
Chapter 4: Configuring The netpad Securing Your Information • Regional Settings, to change settings that may vary from country to country, e.g. the currency and date formats. • Power, to control how and when the netpad switches on and off. For example, you might like it to switch on when you tap the screen, and off when you haven’t used it for three minutes (see “Power Properties” on page 16).
Chapter 4: Configuring The netpad Scanner Properties 4.3 Scanner Properties The Scanners icon in the Control Panel provides dialogue boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize. Figure 4.1 Scanner Icon Note: For instructions on use and safety of the scanner, please refer to “The Scanner” on page 34. The Scanner Properties menu presents three sub-menus: Options, Barcodes, and Translations.
Chapter 4: Configuring The netpad Options 4.3.1 Options Figure 4.2 Options Settings 4.3.1.1 Display Scan Result When this parameter is ON, the type of bar code and the result of the scan appear on the netpad screen. Note that this information is only displayed after a successful decode and only as long as the scanner trigger is pressed. When the trigger is released, this information is cleared from the screen.
Chapter 4: Configuring The netpad Options Scan Beep When this parameter is ON, a beep is played on a successful scan. When it is OFF, no sound is played. 4.3.1.2 Double Click Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature. The default value is 250.
Chapter 4: Configuring The netpad Bar Codes 4.3.1.3 Options Laser-On Time The value selected for Laser-On Time determines how long the scanner sweeps. The allowable values range from 3 to 7 seconds. Trigger: Button II You may choose which netpad button to use for the scanner trigger by double-clicking on the Trigger option. The available choices are: None, Button II, Button I, Up Arrow, Down Arrow, Left Arrow, Right Arrow. The default is Button II.
Chapter 4: Configuring The netpad Bar Codes 4.3.2.1 Code 39 Figure 4.4 Code 39 Bar Code Settings FIELD SIZE / CHARS Field Size The field size is the length of the field after the first character is stripped and the prefix and suffix characters are added. If the field size is non-zero, only bar codes of that length are passed through. Prefix Char This character, if non-zero, is added before a successfully decoded bar code.
Chapter 4: Configuring The netpad Bar Codes Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Enter the desired character, or enter a value of 00 (zero) if no prefix is to be added. The default character is 00 and is input with the key. To append a control character (in the range of 0 to 32 ASCII) as a prefix, press the key and the corresponding letter (a=0, b=1, c=2, etc.).
Chapter 4: Configuring The netpad Bar Codes C39 Full ASCII If this parameter is ON, the ASCII character set assigns a code of letters, punctuation marks, numerals, and most control keystrokes to the keyboard. The bar code special characters $ + % / are used as escape characters. C39 Full ASCII interprets the combination of an escape character and the following Code 39 character as an equivalent ASCII character. Note: C39 Full ASCII and Trioptic C39 (see above) should not be enabled simultaneously.
Chapter 4: Configuring The netpad Bar Codes 4.3.2.2 Code 128 Figure 4.5 Code 128 Bar Code Settings FIELD SIZE / CHARS For the parameter settings in this menu, please refer to “FIELD SIZE / CHARS” on page 64. DECODED SETTINGS USS-128 When using Code 128, you can choose the variation or type of bar code variation the scanner will recognize. The options are: USS-128, UCC/EAN-128, or ISBT 128. Psion Teklogix netpad Windows CE .NET 4.
Chapter 4: Configuring The netpad Bar Codes 4.3.2.3 EAN 13 Figure 4.6 EAN 13 Bar Code Settings FIELD SIZE / CHARS For the parameter settings in this menu, please refer to “FIELD SIZE / CHARS” on page 64. 4.3.2.4 EAN 8 Figure 4.7 EAN 8 Bar Code Settings 68 Psion Teklogix netpad Windows CE .NET 4.
Chapter 4: Configuring The netpad Bar Codes FIELD SIZE / CHARS For the parameter settings in this menu, please refer to “FIELD SIZE / CHARS” on page 64. DECODED SETTINGS EAN-8 Zero Extend When this parameter is ON, five zeros are prefixed to the decoded EAN-8 symbols to make them compatible in format with EAN-13 symbols. Disabling the option returns the EAN-8 symbols to their normal format.
Chapter 4: Configuring The netpad Bar Codes DECODED SETTINGS Decode Supplementals Supplementals are additionally appended characters (2 or 5) according to specific code format conventions (e.g. UPC A+2, UPC E+2, EAN 8+2). Three options are available: Ignore If the scanner comes across a UPC/EAN plus supplemental symbol, the UPC/EAN is decoded, while the supplemental characters are ignored.
Chapter 4: Configuring The netpad Bar Codes Level: 0 This is the default setting. The scanner operates in its most aggressive state while providing sufficient security in decoding “in-spec” UPC/EAN bar codes. Level: 1 As bar code quality diminishes, certain characters become prone to mis-decodes before others (i.e. 1, 2, 7, 8). Where the mis-decodes of poorly printed bar codes are limited to these characters, select this security level.
Chapter 4: Configuring The netpad Bar Codes DECODED SETTINGS Xmit UPC-A Check Digit If this parameter is ON, the check digit is included with the decoded bar code data. UPC-A Preamble For this parameter, if the System Char preamble is selected, the number system character is included with the decoded bar code data. If the System Char + Ctry Code preamble is selected, the number system character and country code are included with the decoded bar code data. 4.3.2.7 UPC E Figure 4.
Chapter 4: Configuring The netpad Bar Codes Convert UPC-E to A When this parameter is ON, it results in a non-standard decoding that returns 12 digits from the 6 digit UPC-E bar code. UPC-E Preamble For this parameter, if the System Char preamble is selected, the number system character is included with the decoded bar code data. If the System Char + Ctry Code preamble is selected, the number system character and country code are included with the decoded bar code data. 4.3.2.8 Codabar Figure 4.
Chapter 4: Configuring The netpad Bar Codes DECODED SETTINGS CLSI Editing When enabled, this parameter strips the start and stop characters, and inserts a space after the first, fifth, and tenth characters of the 14-character Codabar symbol. NOTIS Editing When enabled, this parameter strips the start and stop characters from a decoded Codabar symbol. Set Lengths For the parameter settings in this menu, please refer to “Set Lengths” on page 66. 4.3.2.9 Code 93 Figure 4.
Chapter 4: Configuring The netpad Bar Codes DECODED SETTINGS Set Lengths For the parameter settings in this menu, please refer to “Set Lengths” on page 66. 4.3.2.10 Interleaved 2 Of 5 Figure 4.13 Interleaved 2 Of 5 Bar Code Settings FIELD SIZE / CHARS For the parameter settings in this menu, please refer to “FIELD SIZE / CHARS” on page 64.
Chapter 4: Configuring The netpad Bar Codes Xmit I 2 of 5 Check Digit If this parameter is ON, the check digit is included with the decoded bar code data. Convert to EAN13 This parameter converts a 14-character I 2 of 5 code into an EAN-13, and transmits to the host as EAN-13. To do this, the Interleaved 2 of 5 code must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit.
Chapter 4: Configuring The netpad Bar Codes DECODED SETTINGS Xmit Check Digit If this parameter is ON, the check digit is included with the decoded bar code data. MSI Check Digits Check digits at the end of a bar code verify the integrity of the data. If MSI Check Digits is set to One, it is assumed that the last digit of the bar code is the check digit. If the parameter is set to Two, it is assumed that the last two digits of the bar code are the check digits.
Chapter 4: Configuring The netpad Translations FIELD SIZE / CHARS For the parameter settings in this menu, please refer to “FIELD SIZE / CHARS” on page 64. DECODED SETTINGS Set Lengths For the parameter settings in this menu, please refer to “Set Lengths” on page 66. 4.3.3 Translations Types The Type field indicates what type of translation will occur. Clicking on Add will open the dialogue page to complete the fields. 78 Psion Teklogix netpad Windows CE .NET 4.
Chapter 4: Configuring The netpad Translations Substring looks for a string within the bar code to replace. Prefix or Suffix will replace only prefix/suffix characters with the substitutions. Exact will look for the exact bar code in the Input field, and replace it with the one in the Output field. Input This string entry parameter is compared with the decoded bar code reading. If there is a match, the Output string is translated into the decoded bar code.
FILES, FOLDERS, AND PROGRAMS 5 5.1 5.2 5.3 5.4 5.5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Moving Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Opening Files, Folders And Programs. . . . . . . . . . . . . . . . . . . 83 Closing Programs/Files . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Creating New Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 5.5.1 Creating New Files. . . . . . . . . . . . . . . . . . . . . .
Chapter 5: Files, Folders, And Programs Introduction 5.1 Introduction Windows Explorer is the netpad’s file manager. It is accessible by double-clicking on the My Computer icon. Note: When you turn the netpad on from a suspend, the programs that were previously open will still be open and will display on the screen. When you turn on the netpad from a cold or warm boot, you will see the Desktop. 5.
Chapter 5: Files, Folders, And Programs Closing Programs/Files How can I see which programs are open? The taskbar across the bottom of the screen displays buttons for programs that are open. To switch between programs, click on the button in the taskbar. 5.4 Closing Programs/Files To close the current folder: click on the X icon at the top left corner of the screen. When you close all open folders, you will see the Desktop.
Chapter 5: Files, Folders, And Programs Creating New Files 5.5.1 Creating New Files You can create files from within programs. As a general rule, open the program in which you want to create the file, and select New from the File menu. A file name is suggested. If you do not wish to use this, type a name of your own before pressing the OK button.
Chapter 5: Files, Folders, And Programs Managing Folders 5.8 Managing Folders To move one or more folders or files from one location to another: 1. First highlight the file(s) or folder(s) to select them. Drag with the stylus to select more than one file. To select all the files/folders in the current folder, use the Select all command on the Edit menu. To deselect the items, click on a blank area in the folder. 2. Select the Cut command from the Edit menu.
Chapter 5: Files, Folders, And Programs The Flash Folder 5.9 The Flash Folder The Flash folder, accessed from the My Computer icon on the desktop, can be used to store data securely in case of power loss. It can also be used as the backup location for the Total Recall application (see “Profile Location” on page 90). Data stored in this directory will still exist even if the main battery and backup battery are discharged. Data will also remain in this directory after a “soft” or “hard” reset.
Chapter 5: Files, Folders, And Programs Total Recall 5.10 Total Recall If you need to perform a cold boot (hard reset) on the netpad, any file or database entry that is installed (that is, not a part of the boot image file) will be lost. To avoid this, you can use the Total Recall application, which provides backup and restore capabilities. Total Recall is accessed from the Control Panel. 5.10.
Chapter 5: Files, Folders, And Programs The Profile Information Page 5.10.2 The Profile Information Page If you chose to create a profile (see Section 5.10.1), first enter a new Profile Name. The Profile Settings in bold text show the following information about this profile’s platform and cannot be modified: Image: indicates under which Psion Teklogix product this profile is being generated. OS Version: shows the version of the Windows CE .NET operating system.
Chapter 5: Files, Folders, And Programs The Add Files Page Clone Profile for other devices creates a profile that automatically loads on cold boot for any device that matches the profile’s platform. 5.10.2.2 Profile Location This control lists the possible storage destinations to place the profile file. If more than one location are available, none are selected by default and one location must be chosen to continue.
Chapter 5: Files, Folders, And Programs The Add Files Page If you do not select All Files, then you can choose the By File setting and/or the Databases and Registry options, as required. The By File settings allow you to choose files individually or by type. Expanding the setting provides the By Individual File: (Files: 0) and By File Type options.
Chapter 5: Files, Folders, And Programs The View Selections Page 5.10.4 The View Selections Page The View Selections page shows a list of all the files that you selected in the previous options. In the View dropdown list only the file options that were selected will appear (Files, Databases, and Registry) and the names of the files will be shown in the scrollable window. 5.10.5 Completing Backup/Restore Important: Once the operation starts, do not attempt to stop it or start another process.
Chapter 5: Files, Folders, And Programs Checking System Memory Use 5.11 Checking System Memory Use To display the amount of system memory remaining: double-click the System icon in the Control Panel and select the Memory tab. You can see the amount of free memory in the slider bar. 5.11.
Chapter 5: Files, Folders, And Programs The Storage Manager To delete all the files on a multimedia card: put the card into the MMC slot. Open the Storage Card icon in My Computer, and delete all files. 5.12 The Storage Manager Double-click on the Storage icon in Control Panel to open the Storage Manager dialogue: The Storage Manager shows information about the storage card that is present in the netpad’s MMC slot, including capacity, sector size, and partition properties.
6 CONNECTING NETPAD TO A PC 6.1 Introduction . . . . . . . . . . . . . . . . . . . . . 6.2 Using ActiveSync . . . . . . . . . . . . . . . . . . 6.3 Getting Help. . . . . . . . . . . . . . . . . . . . . 6.3.1 Where Can I Find More Help?. . . . . 6.3.2 Tips On Using ActiveSync Help . . . . 6.4 Working With Your Files . . . . . . . . . . . . . . 6.4.1 Looking At Files On Your netpad . . . 6.4.2 Copying A File Using Drag And Drop 6.4.3 Copying A File Using Copy And Paste 6.4.
Chapter 6: Connecting netpad To A PC Introduction 6.1 Introduction This chapter explains how to use ActiveSync to copy files between a PC and netpad, and how to synchronize items such as Calender, Contacts, Inbox and Tasks files. It assumes some basic knowledge of Windows PC operating systems. These instructions assume that you have established a link between your PC and netpad. See “Setting Up ActiveSync” on page 53 for details on communication links.
Chapter 6: Connecting netpad To A PC Getting Help 6.3 Getting Help 6.3.1 Where Can I Find More Help? ActiveSync includes comprehensive online help, which describes all of the application's features and functionality. Please consult the online help for further information or guidance on using ActiveSync. You can display the help topics by double-clicking on the ActiveSync icon on the PC taskbar and selecting Help from the menu, then Microsoft ActiveSync Help.
Chapter 6: Connecting netpad To A PC Working With Your Files 6.4 Working With Your Files 6.4.1 Looking At Files On Your netpad Using Windows Explorer, you can open, move, copy and delete files stored on your netpad from your PC. • On the PC, double-click on the Mobile Device icon in your PC’s My Computer folder. The Mobile Device window opens, displaying icons for the files and folders in the My Computer folder.
Chapter 6: Connecting netpad To A PC Copying A File Using Copy And Paste 6.4.3 Copying A File Using Copy And Paste Using Windows Explorer, you can copy files between your PC and netpad in the same way you would copy files to a floppy disk, or another PC on a network. ActiveSync can convert files as they are copied so that you can open them on the other computer immediately.
Chapter 6: Connecting netpad To A PC Opening netpad Files From Your PC 6.4.4 Opening netpad Files From Your PC You can open a file on your netpad using a PC application without first having to copy it to your PC drive. You can edit the file on your PC and then save it back to your netpad when you have finished. To open a file from Windows Explorer, double-click on the file icon or press Enter. When you save the file within the PC application, ActiveSync saves the edited file back to your netpad. 6.
Chapter 6: Connecting netpad To A PC Synchronizing Your netpad 6.6 Synchronizing Your netpad 6.6.1 What Is Synchronization? You can use synchronization to manage information that you wish to keep up to date on both your PC and netpad, such as appointments or address book entries. When you synchronize, ActiveSync checks the information in your PC program with the matching program on your netpad, and then updates the files on both your PC and netpad to include the new information.
Chapter 6: Connecting netpad To A PC Synchronizing Your netpad 6.6.2.1 Creating The Partnership 1. Make sure that your netpad is connected to the PC via the serial cable. 2. Set the PC to listen on the port the serial cable is connected to. 3. On the netpad, check the PC Connection properties to make sure it is set to send to the correct port. 4. On the netpad, click on the Start button, then Programs, then ActiveSync, and select direct from the ActiveSync menu.
Chapter 6: Connecting netpad To A PC Synchronizing Your netpad 5. Check all items to be synchronized. These can be changed after the partnership has been created. 6. To customize settings for a particular type of information, click on the Settings button. This can also be done after the partnership has been created. More information on customized settings can be found by referring to ActiveSync’s online help. 7. Click Next. 8.
Chapter 6: Connecting netpad To A PC Using An Existing Partnership 6.6.3 Using An Existing Partnership Once you have set up the partnership as above, you can use it whenever you wish. When the netpad and the PC are connected afterward, it will automatically use the current partnership. To force synchronization, make sure the netpad and the PC are already connected. Press the Sync button in the PC’s ActiveSync window. To stop synchronization, click on the Stop button.
CONFIGURING COMMUNICATIONS 7 7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 7.2 802.11b Radio Configuration . . . . . . . . . . . . . . . . . . . . . . 109 7.2.1 Agere 802.11b PC Card Radio . . . . . . . . . . . . . . . .109 7.2.2 Cisco 802.11b DS SS PC Card Radio . . . . . . . . . . . .114 7.2.2.1 Profiles. . . . . . . . . . . . . . . . . . . . . . . . .115 7.2.2.2 Firmware. . . . . . . . . . . . . . . . . . . . . . . .122 7.2.2.3 Status. . . . . . . . . . . . . . . .
7.5.2 Setting Up Your netpad. . . . . . . . . . . 7.5.2.1 How To Use Internet Explorer/Inbox 7.5.2.2 Getting Help . . . . . . . . . . . . . 7.5.2.3 What Information Do I Need? . . . . 7.5.2.4 IPv6 Support . . . . . . . . . . . . . 7.5.3 Setting Up E-mail On netpad. . . . . . . . 7.5.3.1 Connecting The Modem . . . . . . . 7.5.3.2 Setting Up Dialing . . . . . . . . . . 7.5.3.3 Setting Up The Internet Service . . . 7.5.3.4 Setting Up The Modem . . . . . . . 7.5.3.5 Setting Up The E-mail Program . . .
Chapter 7: Configuring Communications Introduction 7.1 Introduction Before you can use Internet Explorer (the Internet browser) and Inbox (the e-mail application), some basic configuration is necessary for the specific type of radio installed on your netpad. First, make sure Flight Mode is OFF. If Flight Mode is ON, there will be an airplane icon in the taskbar. To open Flight Mode Settings in order to disable it, click on the icon. For detailed information on Flight Mode, please refer to page 24. 7.
Chapter 7: Configuring Communications Agere 802.11b PC Card Radio 2. By clicking on Advanced in the Wireless Information tab, you can access the settings screen to adjust priority of network connections. 3. Select the Use Windows to configure my wireless settings checkbox. 4. You can add a network, configure WEP for security, and enable IEEE 802.1X authentication by double-clicking on the Add New selection in the Wireless Information tab. 5. The Wireless Properties dialogue opens for a new network.
Chapter 7: Configuring Communications Agere 802.11b PC Card Radio 6. IEEE 802.1X is an authentication protocol that can be used with IEEE 802.11b networks. Currently, MD5 Challenge, PEAP, and TLS are the EAP (Extensible Authentication Protocol) types supported by the netpad. The EAP type setting must match the configuration of the RADIUS Server on the wired network. In addition to this, the access point must support IEEE 802.1X and must be configured appropriately. 7.
Chapter 7: Configuring Communications Agere 802.11b PC Card Radio 8. By selecting the IP Information tab, you can configure the IP settings for the card. 9. Selecting Configure in the IP Information page, opens your radio Settings menu for IP Address and Namer Servers. By selecting the IP Address tab, you can specify the IP address or have it automatically assigned. 10. By selecting the Name Servers tab in the radio card’s Settings menu, you can configure DNS and WINS servers.
Chapter 7: Configuring Communications Agere 802.11b PC Card Radio 11. By selecting the Wireless Statistics tab, you can view the statistics for the card. When the radio is not associated, the RSSI displays -100 dBm and the Network Name field displays [Not associated]. 12. Click on OK to save your settings. These settings can also be changed by entering the Control Panel and clicking on Network and Dial-Up Connections, then on the adaptor name. Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio 7.2.2 Cisco 802.11b DS SS PC Card Radio The following are the basic settings necessary to be able to run the netpad on an 802.11b radio network using the Cisco IEEE 802.11b Direct Sequence Spread Spectrum PC Card (TRX7441) radio and Aironet Client Utility (ACU) program. If you require more detailed information on AUC parameter configuration, please go to the Cisco product documentation web site: http://www.cisco.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio 7.2.2.1 Profiles You can create different operating profiles for the netpad. This section explains how to change the configuration parameters in the Aironet client adaptor for a specific profile. By clicking on the About... button in the Aironet Client Utility menu, you can see the software version of the program.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio 1. Click on the Add button, or select a profile in the Manage Profiles screen and click on the Edit button. The Properties menu appears. The Property box lists the configuration parameters that can be changed, and the Value box contains the highlighted parameter’s current value. The Value box can appear as a dropdown menu with values from which to choose, or as a blank field into which characters are entered. 2.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio Infrastructure Mode When this parameter is set to Yes, the netpad operates in Infrastructure mode, passing data through an access point—terminals cannot communicate directly with other terminals in the network. If this parameter is set to No, the netpad operates in “ad hoc” or “peer-to-peer” mode, passing data directly to other terminals—an access point is not required. The default setting is Yes.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio dard does not specify EAP types. LEAP also provides the netpad with a new WEP key. Each terminal has a unique WEP key to increase the security of the 802.11b radio link. Important: Note: This parameter must be enabled before setting a LEAP User Name, User Password, and User Domain (see page 119). Host Based EAP is not supported.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio Note: This option is available only if Static WEP Keys is enabled (see “WEP (Wired-Equivalent Privacy)” on page 118), and LEAP is not enabled (see “Network Security Type” on page 117). Important: Shared Key Authentication is not recommended as it presents a security risk. User Name Important: BEFORE assigning a User Name, User Password, and User Domain, the LEAP parameter must be Enabled.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio Mixed Mode When this parameter is set to Enabled, the netpad can communicate with Cisco access points that have encryption set to ‘optional’—that is, whether or not encryption is available, the netpad will be able to communicate with a Cisco access point. If Mixed Mode is set to Disabled, the netpad can only communicate with Cisco access points that have full encryption enabled. The default is Disabled.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio Keep in mind that the allowable values are dependent on the power table programmed into the netpad. Table 7.1 outlines these values. Values Card Type The default value—Max— represents the maximum level programmed into the netpad and allowed by your country’s regulatory agency. Max, 100 mW, 50 mW, 30 mW, 20 mW, 5 mW or 1 mW 350 series PC and LM cards. Table 7.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio 7.2.2.2 Firmware The Firmware screen in the Aironet Client Utility menu shows the firmware version of the radio. 7.2.2.3 Status The ACU Status screen indicates if MIC is supported by the client adaptor’s driver and is enabled on the access point. Note: 122 If you enable MIC on the access point, your client adaptor’s driver must support MIC; otherwise, the client cannot associate. Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications Cisco 802.11b DS SS PC Card Radio 7.2.2.4 Statistics The Statistics screen in the Aironet Client Utility menu shows the transmit and receive statistics of the radio 7.2.2.5 Survey The Survey screen in the Aironet Client Utility menu shows the radio signal strength and quality. The type of unit used to display the signal can be set by clicking on the Setup button to open the ACU Options menu, shown next. Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration ACU Options The ACU Options dialogue enables the display of radio signal strength in either Percent (%) or dBm. 7.3 GSM/GPRS Radio Configuration The following menus provide the configuration settings for the GSM/GPRS Globetrotter Option radio card. For details on setting up a modem through the serial port, please refer to “Connecting The Modem” on page 153.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration 2. Turn the netpad on. The Insert SIM card dialogue box will appear. Click OK to close the dialogue. 3. Double-click on the My Computer icon, then on the Windows folder. 4. Go to View/Options... which will open the Folder Options menu. Under Advanced Settings, uncheck the Hide protected operating system files (Recommended) option, then click OK. 5. Double-click on the GSM Band icon. This will bring up the GSM Band Selection menu.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration 6. Select the correct band setting for your GSM provider. Then click on the OK button. The hourglass will appear. When it is gone, use the X button to close GSM Band Selection. 7. From the Control Panel, double-click on the APN Manager icon. 8. In the APN Manager, click on the Add button. 9.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration 13. The “Registering to Network” message should appear. If registration is successful, the message “Setting APN” will be displayed briefly. If registration fails, the “Could not register with” message will appear. 14. Next, open the Control Panel. Double-click on the Network and DialUp Connections icon. The following menu will appear. 15. Double-click on the Make New Connection wizard.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration 16. Select Globetrotter from the dropdown list in the Modem screen. 17. Click on the Configure button next to the dropdown list, and the following menu appears. From the Baud Rate dropdown list, select 115200. 18. Then click on the Call Options tab to access the following menu. 19. Uncheck the Wait for dialtone before dialing box and click OK. The Modem selection screen will return. Click on the Next button.
Chapter 7: Configuring Communications GSM/GPRS Radio Configuration 20. The following menu appears. Enter the phone number. Most providers use *99# as the GSM/GPRS phone number. 21. Click on the Finish button. It will return to the Network and Dial-Up Connections screen. You should now see a connection called “GPRS”. 22. Double-click on the GPRS connection. This will bring up the Dial-Up Connection screen. Click on the Dial Properties... button. 23. This will bring up the Dialing Properties dialogue box.
Chapter 7: Configuring Communications Bluetooth Radio Configuration 24. You should be returned to the Dial-Up Connection screen. 25. Enter your User Name and Password, if your provider has given you one. Note: Not all providers require a user name or password. 26. To start a GPRS session, click on the Connect button. Important: While GSM/GPRS is active, ActiveSync will not be available. 7.4 Bluetooth Radio Configuration Bluetooth is a global standard for wireless connectivity for digital devices.
Chapter 7: Configuring Communications netpad Bluetooth Settings 7.4.1 netpad Bluetooth Settings Open the Control Panel and double-click on the Bluetooth Device Properties icon. The Bluetooth manager will open showing the Bluetooth Controls dialogue box. There are three menu pages: Devices, Servers and Property. The Devices menu is for scanning and activating remote Bluetooth devices and their services (or ‘profiles’). See Section 7.4.1.1 on page 132 for details.
Chapter 7: Configuring Communications netpad Bluetooth Settings 7.4.1.1 Devices Menu Page Scan In the Devices menu page, click on the Scan button and wait for the netpad to complete its scan (approximately 20 seconds). When scanning starts, the ‘Scan’ button will change to ‘Stop’, and if needed you can click on this button to stop the process. Once scanning is complete, all discovered devices will be displayed in the list box, with Name, Address, Active status, and PIN information.
Chapter 7: Configuring Communications netpad Bluetooth Settings Services A discovered device may display several service profiles that it can use to communicate, and you will want to activate the type you need. Supported profiles that can be activated include: DUN (Dial-Up Networking service), Printer (serial service), and LANPPP (LANAccessUsingPPP service). ASync (ActiveSync) is another available profile—for connection details, refer to “Connecting Via Bluetooth” on page 55.
Chapter 7: Configuring Communications netpad Bluetooth Settings The Authenticate and Encrypt options can be changed only before activation. To change those after activation, deactivate the service first, then change the options. Once a service is activated, all the information regarding the service, including the RFCOMM channel number, is saved in the registry.
Chapter 7: Configuring Communications netpad Bluetooth Settings After the PIN has been validated, you will see an asterisk (*) in the PIN column in the Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in the registry. To remove the PIN, press Set PIN, then . If the netpad tries to connect with a remote device for which no PIN has been set but requires a PIN, and has Authentication enabled, you will be prompted to verify the PIN.
Chapter 7: Configuring Communications netpad Bluetooth Settings Once you activate a server profile, it is recommended that the netpad is rebooted before you try to bond from a server. You don't have to reboot when you're deactivating a server. 7.4.1.3 Property Menu Page The Property menu page shows information about your netpad, and provides some port options. The Device Name field shows the device name of your netpad. This name can be changed (see the Note on page 137).
Chapter 7: Configuring Communications netpad Bluetooth Settings Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP, BSP2 to BSP9 are available for activated services (including the server). When COM is chosen, COM7 to COM9 are available. The Connection list table shows the Name, Address, and Type of the currently active connections. The table is periodically updated while on display, but it could take a few seconds before it reflects the actual list of connections.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth The netpad is now ready to run application software to communicate with the required device, i.e. The ScanPrint Demo can now be run in conjunction with a Zebra® printer, or run Internet Explorer (assumes the appropriate network settings have been made—see “GPRS Communications With Bluetooth”, below). 7.4.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 4. Press the Scan button and wait for the cell phone to be discovered by the netpad—it will appear in the Devices list box. 5. Once the cell phone appears in the list box, add a paired device from your cell phone. Allow for the cell phone to accept the pairing, and not initiate pairing. 6. When the netpad connects with the cell phone, you will be prompted to verify the PIN. The Authentication Request dialogue will appear.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 7.4.2.2 Configuring A GPRS Connection 1. First configure a GPRS profile on your cell phone. Settings: Select Data comm., then Data accounts, then Add accounts. 2. The phone will prompt you for GPRS or GSM. Select GPRS and give the account a new name. 3. You will then be prompted for the APN, User ID, and Password. For example: Service APN User ID Password Fido internet.fido.ca None None Rogers AT&T internet.com (or goam.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 6. Select BluetoothDUN from the dropdown list in the Modem screen. 7. Click on the Configure button next to the dropdown list to open the Device Properties menu. From the Baud Rate dropdown list under the Port Settings menu tab, select 115200. Then set Flow Control to Hardware. 8. Next, click on the Call Options tab to access the Call Setup menu. Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 9. Uncheck the Wait for dialtone before dialing box and click OK. This will return you to the Modem selection screen. 10. Click on TCP/IP Settings…, then under the General menu tab check the Use server-assigned IP address box. And, under the Name Servers menu tab also check the Use server-assigned addresses box. Then press OK to continue. You will return to the Modem screen. 142 Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 11. Next, in the Modem menu, click on Security Settings... to open the Advanced Security Settings menu. Check the Unencrypted password (PAP) box, and press OK. 12. You will return again to the Modem menu, select Next > to continue. In the Phone number field enter *99***(CID#)#. Most providers use *99# as the GSM/GPRS phone number, and if for example the account you created on your phone was the fourth account, enter *99***4#. 13.
Chapter 7: Configuring Communications GPRS Communications With Bluetooth 14. Double-click on the GPRS icon. This will bring up the Dial-Up Connection screen. Enter the User Name and Password accordingly. (Not all providers require a user name or password.) 15. Click on the Dial Properties... button, and select GSM/GPRS from the When dialing from: dropdown box. Select OK to continue. 16. From the Dial-Up Connection window select Connect and your phone should initiate a GPRS connection.
Chapter 7: Configuring Communications Internet And E-Mail Settings 7.5 Internet And E-Mail Settings 7.5.1 Overview Before you can use Internet Explorer (the Internet browser) and Inbox (the e-mail application) on your netpad, you need to set up certain details. This section covers some general questions that people ask about using e-mail and the Internet, and provides a glossary of terms.
Chapter 7: Configuring Communications Overview Connecting A PC To Access Your Mailbox This is for connecting directly to a PC that can access your mailbox. Using ActiveSync's ‘Inbox Synchronization’, you can write e-mails on your netpad, and then connect to your PC to send and receive messages. How do I do this? To access your mailbox via a PC, you will first need to install ActiveSync on the PC and set up a partnership to use ‘Inbox Synchronization’. 7.5.1.
Chapter 7: Configuring Communications Overview Web-based E-mail Account This is an e-mail account that you must connect to using a web browser, e.g. HotMail or Yahoo! Mail. Note: You can’t connect to this type of account using the e-mail program. To use web-based e-mail, you must first set up your netpad for Internet access. You will need to use the Internet Explorer program to access your email provider’s web site. 7.5.1.
Chapter 7: Configuring Communications Setting Up Your netpad IP address A computer’s unique Internet address, e.g. 194.129.243.153, used by computers to communicate with each other. ISP Internet Service Providers are companies that provide you with access to the Internet. An ISP ‘account’ normally includes the facility to send and receive email using a personal e-mail address. POP3/IMAP4 Internet ‘protocols’ (standards) for receiving e-mail. SMTP An Internet protocol used for sending e-mail.
Chapter 7: Configuring Communications Setting Up Your netpad 3. A telephone connection. If you are using a standard external modem, you will need to connect your modem to a telephone socket. If you are using a mobile phone, your network operator will need to enable your SIM (Subscriber Identity Module) card so that you can make fax and data calls on your phone. If your phone has been enabled for fax and data calls, you should have two extra phone numbers.
Chapter 7: Configuring Communications Setting Up Your netpad Information Checklist The checklist in Table 7.2 shows what information you will need to set up your netpad. Only your ISP or your network administrator can supply all the information required about your Internet e-mail account. Information You Need Where To Find It Speed at which you should Your modem’s documentation. use your modem (called the baud rate). Phone Number you need to From your ISP/administrator.
Chapter 7: Configuring Communications Setting Up Your netpad Some service providers require additional information to ‘log on’ to their server. You may need the following information when using some service providers. Optional Information Where To Find It IP Address (if your ISP’s server doesn’t provide one automatically). From your ISP/administrator e.g. “194.129.243.153”. DNS Addresses (primary and secondary DNS addresses if your ISP’s server doesn’t provide them automatically).
Chapter 7: Configuring Communications Setting Up Your netpad 2. Double-click on the IPv6 Support icon to access the dialogue that enables this feature. 3. To enable IPv6 network support, check the box, and click OK. Because the netpad must reset in order to activate the change, a dialogue box will open to confirm the change or allow you to cancel to prevent resetting. You may also disable the IPv6 feature by unchecking the box, and allowing the netpad to reset once again.
Chapter 7: Configuring Communications Setting Up E-mail On netpad 7.5.3 Setting Up E-mail On netpad If you have collected all the information in the checklist, you are now ready to set up your netpad to connect to your ISP. 7.5.3.1 Connecting The Modem 1. Connect your netpad to the modem using the netpad’s serial cable. What Do I Need To Do This? To connect your netpad serial cable to your modem you may require a Psion Teklogix modem cable adaptor.
Chapter 7: Configuring Communications Setting Up E-mail On netpad 3. The netpad comes with two default locations, Home and Work. Adjust these to suit your needs by selecting the location in the dropdown box and editing the associated information. For more control over dialing patterns, push the Dialing Patterns... button. If you don’t want to use any of these pre-defined locations, you can add a new location. It will appear selected in the drop-down list, ready to edit. 4.
Chapter 7: Configuring Communications Setting Up E-mail On netpad 8. The Dial-Up Networking screen should show your new connection with the dial-up icon. 9. To connect, double-click on the connection. You must enter your user name and password. 10. When you have finished entering the settings, click on Connect to dial the connection. Psion Teklogix netpad Windows CE .NET 4.
Chapter 7: Configuring Communications Setting Up E-mail On netpad 7.5.3.5 Setting Up The E-mail Program Once you have set up your Internet service, you can set up your e-mail account in the e-mail program. To create a new account in e-mail: 1. On the netpad, click on the Start button, then Programs, then Network, and select Inbox from the menu. 2. Select Inbox from the Options command on the Services menu. 3. On the Services tab: • Click Add. • Select the type of service to use.
8 NETPAD ACCESSORIES 8.1 8.2 8.3 8.4 Introduction . . . . . . . . . . . . . . . . . . . Accessory Product List . . . . . . . . . . . . . The In-vehicle Docking Station . . . . . . . . . Battery Charger Instructions . . . . . . . . . . . 8.4.1 Important Safety Instructions . . . . 8.4.2 Charging A Battery . . . . . . . . . 8.4.3 4-Bay Battery Charger Installation . 8.4.4 Portable Battery Charger Installation 8.5 RS-232 Connector Assembly Instructions. . . . 8.5.1 RS-232 Connector Parts . . . . . . . . . .
Chapter 8: netpad Accessories Introduction 8.1 Introduction The following optional accessories are available from Psion Teklogix. These accessories are compatible with all netpad models in the netpad product range. Please check the Psion Teklogix web site at www.psionteklogix.com for updates to this list. 8.
Chapter 8: netpad Accessories Accessory Product List ACCESSORY PRODUCTS PART NUMBER MODEL NUMBER BATTERIES AND CHARGERS* 1100 mAh Li-Ion Thin Battery (comes standard with 1000 series netpads) A2202 0054 0001 1800 mAh Li-Ion Enhanced Battery (comes standard with 3000 and 5000 series netpads) A2202 0051 0001 4400 mAh Li-Ion High Capacity Battery A2202 0052 0001 netpad Portable Battery Charger The Portable Battery Charger provides a convenient method of charging a single battery pack from mains or 12
Chapter 8: netpad Accessories Accessory Product List ACCESSORY PRODUCTS CABLES PART NUMBER RS-232 Serial Cable (9-pin Female D-type to netpad) A2203 0004 0001 RS-232 Adaptor Cable The RS-232 Adaptor Cable has 9-pin Male D-type for connection to the netpad R232 port and can be used to connect serial peripherals such as printers, modems or cell phones to the netpad A2888 0015 0003 RS-232 Connector Assembly This part is used to connect a peripheral cable directly to the proprietary RS-232 port on the ne
Chapter 8: netpad Accessories The In-vehicle Docking Station 8.3 The In-vehicle Docking Station The netpad in-vehicle docking station provides a durable and flexible solution for mounting the netpad in vehicles. For further details, please refer to “Using The Docking Station” on page 43. The docking station offers the following features: 162 • Highly adjustable. The mounting arm can be adjusted to provide the ideal viewing angle, no tools required. • Small footprint.
Chapter 8: netpad Accessories Battery Charger Instructions 8.4 Battery Charger Instructions 8.4.1 Important Safety Instructions • The AC plug is a power disconnect device. The socket must be near the equipment and easily accessible. • To reduce the risk of damage to the electric plug and cord when unplugging the AC adaptor, pull the plug rather than the cord.
Chapter 8: netpad Accessories 4-Bay Battery Charger Installation If a battery is left in the charging station, the charger will periodically refresh the battery's charge. To remove the battery, press down the latch on the top of the battery and lift the battery from the charging station. Important: It is recommended that if there is no power connected to the battery charger, then all batteries should be removed. Summary of Indicators: RED The battery is charging.
Chapter 8: netpad Accessories RS-232 Connector Assembly Instructions 8.5 RS-232 Connector Assembly Instructions 8.5.1 RS-232 Connector Parts 2 6 7 5 4 1 Cable 3 Completed Assembly No. Description Part No. 1 2 3 4 5 6 7 10-Way Connector Upper Hood Lower Hood Screw H23 Clip SR Screw M2x5.5 — 40W C2001141 A0202138 A0202139 A0106022 A0102099 A0205065 A0105030 Table 8.
Chapter 8: netpad Accessories RS-232 Connector Parts Notes: 1. Material: Upper Hood: ABS UL 94-VO, Black Lower Hood: ABS UL 94-VO, Black SR: PVC, Black Clip: Brass 10-Way Connector Female UL 94-VO, Black 2. Contour P/N: C30611-00 3. QC Dimension Check: 166 Critical Psion Teklogix netpad Windows CE .NET 4.
TROUBLESHOOTING AND TIPS 9 9.1 General Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9.1.1 Times Aren’t Correct In The Time Program . . . . . . . . .169 9.1.2 If You Forget Your Password . . . . . . . . . . . . . . . .169 9.1.3 The netpad Doesn’t Turn On/Off . . . . . . . . . . . . . .169 9.1.4 Resetting The netpad. . . . . . . . . . . . . . . . . . . . .170 9.1.5 Can’t Place The netpad In The Docking Station. . . . . . .170 9.1.6 Battery Life Of The netpad Variants . . . . . . .
Chapter 9: Troubleshooting And Tips General Tips 9.1 General Tips You should read this chapter if you have any questions or experience problems using your netpad. If you’re having trouble configuring a program, remember to refer to the Windows CE Help online document by tapping the ? icon located on the top right of the program’s menu bar. 9.1.1 Times Aren’t Correct In The Time Program Note: Always select the Time Zone first and apply it before setting the time and date.
Chapter 9: Troubleshooting And Tips Resetting The netpad netpad in the docking station to recharge the battery or replace the main battery with a charged one. • If after charging the main battery, the netpad won’t turn on, perform a soft reset (see “Performing A Soft Reset (WarmBoot)” on page 32). If this doesn’t correct the problem, perform a hard reset (see “Performing A Hard Reset” on page 33).
Chapter 9: Troubleshooting And Tips Battery Life Of The netpad Variants 9.1.6 Battery Life Of The netpad Variants Many variables affect netpad power consumption and battery life. Unlike other battery chemistries, Lithium Ion batteries do not suddenly fail unless they have been abused in some way. The battery capacity gradually reduces over the lifetime of the battery.
Chapter 9: Troubleshooting And Tips Battery Life Of The netpad Variants Notes: 1. Figures quoted are the number of hours the battery will last if the usage pattern is repeated until the battery is fully discharged. (Excludes reserve tank capacity.) See “Usage Scenarios”, below. 2. Battery life times have been rounded to the nearest hour. 3. All battery life figures quoted above are based on units with 64MB RAM and Transmissive LCD. 4.
Chapter 9: Troubleshooting And Tips Battery Life Of The netpad Variants Route Accounting: Using a netpad with a GSM radio, the user performs one transaction per minute, where each transaction includes a scan, a transmission to the host, and an update from the host. The terminal is used for 30 minutes, followed by 15 minutes in Stand-By mode. 9.1.6.2 Charging Times The standard netpad battery charging solutions do not use trickle charging or fast charging.
Chapter 9: Troubleshooting And Tips ActiveSync Connection Problems Using Windows® 95/98/NT 4.0 9.2 ActiveSync Connection Problems Using Windows® 95/98/NT 4.0 This section is a guide to troubleshooting connection problems between a netpad and a PC running Windows 95/98/NT 4.0 and ActiveSync. It also presumes you have already gone through the online help documents that come with ActiveSync, and still have no success in linking. A basic knowledge of using the netpad and Windows 95/98/NT 4.0 is necessary.
Chapter 9: Troubleshooting And Tips Basic Troubleshooting For Your netpad 9.2.2 Basic Troubleshooting For Your netpad 1. Close down all applications. To see all active programs, look on the taskbar. Each program running will have a button. The programs can be activated then closed normally, or if necessary, you can right-click on the program’s taskbar button and choose Close from the context menu. 2. Check that the PC Connection setting in the Control Panel is enabled and set to the correct serial port.
Chapter 9: Troubleshooting And Tips Basic Troubleshooting For Your PC • Right-click the ActiveSync icon and choose Connection Settings from the context menu. • Make sure that the correct connection type is checked. • It is possible for ActiveSync to conflict with a modem or mouse. Symptoms are the mouse pointer intermittently locking up or software that uses the modem intermittently freezing. Check your PC’s device manager for conflicts. 4. If you are using Windows NT 4.
Chapter 9: Troubleshooting And Tips Device Conflicts 9.2.4 Device Conflicts To check for device conflicts: 1. Click on the Start button, select Settings and then Control Panel. 2. Double-click on the System icon. 3. On the Device manager page of the System properties dialogue, check for icons marked with a symbol. Note: This symbol means that the marked device is conflicting with another device. If a modem or COM port is conflicting, this could be a cause of ActiveSync not connecting.
Chapter 9: Troubleshooting And Tips Fax/Modem On COM 1/2/3/4 Windows NT Diagnostics dialogue box. If you do not have this option or you are in any doubt about it, you should contact your Systems Administrator. 9.2.5 Fax/Modem On COM 1/2/3/4 If you have a Fax/Modem using COM Port 3 or 4, and ActiveSync on COM 1 or 2 (or vice versa), you may have trouble when trying to connect with the netpad. Because of the way a PC handles COM ports, COM1 and COM3 are ‘linked’, as are COM2 and COM4.
Chapter 9: Troubleshooting And Tips Troubleshooting ActiveSync Synchronization Problems If you have an external modem and have unplugged it to use the Psion Teklogix serial cable on the same port, you will not get a connection. Windows 95/98/NT 4.0 reserves this port for use with the modem and so you will have to use another port. 9.3 Troubleshooting ActiveSync Synchronization Problems This section discusses various problems that may be encountered when synchronizing using a partnership.
Chapter 9: Troubleshooting And Tips Basic Troubleshooting For Synchronization Problems The majority of synchronization problems are caused by setting up a synchronization incorrectly. Please make sure you have read the appropriate sections in Chapter 6: “Connecting netpad To A PC” first. These explain the correct way to set up a synchronization. 9.3.1 Basic Troubleshooting For Synchronization Problems Some common causes of sychronization errors include incorrect settings, and e-mail issues.
Chapter 9: Troubleshooting And Tips Other Things To Try • Open ActiveSync by double-clicking on the ActiveSync icon in the PC’s taskbar. This will bring up the ActiveSync dialogue. • Click on the File menu and select Delete Partnership from the menu. The Delete Partnership menu item will not be available if there are no partnerships. If you have deleted all the partnerships, the next time you connect your netpad, the partnership will be created as “WindowsCE”. 2.
10 SPECIFICATIONS 10.1 Hardware Specifications . . . . . . . . . . . . . 10.1.1 Physical . . . . . . . . . . . . . . . . 10.1.2 Environmental Characteristics . . . . 10.1.3 Standard Display . . . . . . . . . . . 10.1.4 Power Requirements . . . . . . . . . 10.1.5 Standard Processor And Memory . . 10.1.6 Miscellaneous. . . . . . . . . . . . . 10.2 Standard Operating System. . . . . . . . . . . . 10.3 Radios . . . . . . . . . . . . . . . . . . . . . . 10.4 Regulatory Information: Agere 802.11b PC Card 10.
Chapter 10: Specifications Hardware Specifications Note: Specifications are subject to change without notification. 10.1 Hardware Specifications 10.1.1 Physical Enclosure: Rugged IP 67 Tablet. Dimensions: 1000 series: 215 x 85 x 25 mm (8.47 x 3.35 x .99 in.) 3000 series (excluding antenna): 215 x 85 x 35 mm (8.47 x 3.35 x 1.37 in.) 5000 series (excluding antenna): 215 x 85 x 35 mm (8.47 x 3.35 x 1.37 in.) Weight: 1000 series: 547 g/1.21 lb. (incl. 1100 mAh battery pack) 3000 series: 650 g/1.43 lb.
Chapter 10: Specifications Standard Display (3000 series) Operating High Low +55°C (+131°F) -20°C (- 4°F) Storage High Low +60°C (+140°F) - 25°C (-13°F) Relative Humidity: Operating 0% to 95% maximum, non-condensing. EMI/RFI: USA: FCC Part 15 Class B Europe: EN55022 Class B, EN 55024 Safety: Complies with EN60950 10.1.3 Standard Display High-quality half-VGA size. 640 X 240 pixels/256k colour display with backlight. Support for dynamic switching between landscape and portrait operation.
Chapter 10: Specifications Standard Processor And Memory 10.1.5 Standard Processor And Memory Intel SA-1110 Strong ARM, running at 206 MHz. Internal ROM: 16-32 MB Flash. Internal RAM: 64 MB SDRAM. 10.1.6 Miscellaneous Keyboard: Soft keyboard (on-screen). Various models also include a Navigation button and 2 programmable soft keys. Data Storage: Multimedia card for expandable, removable data storage. Pointing Device: Pen and touch-sensitive screen. I/O: IrDA 1.1 (115 Kbs). Also supports Fast IrDA.
Chapter 10: Specifications Radios 10.3 Radios Note: The following netpad models house internal antennas within their enclosures: Models 5121, 5122, 5321, 5322, 5521, 5522, 5721, and 5722. GSM/GPRS Globetrotter Option Radio Card Radio: GSM/GPRS Tri-Band (900/1800/1900 MHz). Supports: GPRS Class 10 (max 56 Kbps), GSM Circuit Switched Data (max 9.6 Kbps), Supplementary Services (SS), Unstructured Supplementary Services (USSD) Short Message Service (SMS), GSM 7.05 AT commands.
Chapter 10: Specifications Radios Agere IEEE 802.11b 2.4GHz DS SS (TRX7431)* Frequency Range: 2.4 GHz - 2.5 GHz. Data rates: 1, 2, 5.5, 11 Mbps. Encryption: 40 bit or 128 WEP. Channels: 11 (FCC) 13 (ETSI) 4 (FR) Range: Up to 250 m under optimal conditions. Antenna: 802.11b external stub antenna; internal diversity antenna. * For regulatory information concerning the Agere PC Card, please see page 190. Cisco Air350 802.
Chapter 10: Specifications Regulatory Information: Agere 802.11b PC Card 10.4 Regulatory Information: Agere 802.11b PC Card The IEEE 802.11b Agere PC Card must be installed and used in strict accordance with the manufacturer’s instructions. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
Chapter 10: Specifications Regulatory Information: Agere 802.11b PC Card Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy.
Chapter 10: Specifications Regulatory Information: Cisco Air350 PC Card 10.5 Regulatory Information: Cisco Air350 PC Card The Cisco Air350 series PC Card must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. This device complies with the following radio and frequency safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
APPENDIX A SUPPORT SERVICES AND WORLDWIDE OFFICES Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. A.1 Technical Support Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets. To reach the website, go to www.psionteklogix.com and click on the appropriate Teknet link on the home page.
A.3 WORLDWIDE OFFICES OMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE Psion Teklogix Inc. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 E-mail: salescdn@psion.com Psion Teklogix Corp. 1810 Airport Exchange Boulevard Suite 500 Erlanger, Kentucky USA 41018 Tel: +1 859 371 6006 Fax: +1 859 371 6422 E-mail: salesusa@psion.
Psion Teklogix Africa Postnet Suite 39, Private Bag x11 Halfwayhouse, 1685 Ground Floor East Waterfall Edge Phase 2, Waterfall Park Bekker Road MIDRAND 1685 South Africa Tel: +27 11 805 7440/1/2 Fax: +27 11 805 7444 Psion Teklogix Systems India Pvt. Ltd. M-74, 1st Floor, “M” Block Market Greater Kailash-Il New Delhi - 110048 India Tel: +91 11 26219257 Fax: +91 11 26219076 E-mail: tekind@psion.com Psion Teklogix Wireless Technologies (Shanghai) Ltd. Unit 1507-08 Mingshen Building No.
INDEX Boldface indicates a parameter, menu or sub-menu name. A accessory product list 159 ActiveSync about 5 ASync profile 133 AutoLaunch 44, 57 backup 101 connecting netpad to the PC 56 connection problems 174 copying files 95, 99–100 installing 174 synchronizing files 95, 102–105 troubleshooting 179 using 56 ACU (Aironet Client Utility) 114 ACU Options 124 Add Files Page, Total Recall 90 additional programs 8 Agere PC card radio regulatory information 190 specifications 189 802.
Index status 17 4-bay charger 160 Battery Settings 23 Battery Suspend Threshold 23 Baud Rate 128 Baud Rate, Bluetooth radio 141 Bluetooth radio Address 132 radio specifications 188 Bluetooth Controls, dialogue box 131 BluetoothDUN 141 Bluetooth radio Address 132 changing device name 137 device service profiles 133 GPRS communication 138–144 ISM band 130 PINs for devices 134 radio configuration 130–137 brightness control 30 browsing folders 85 BSP, Bluetooth Controls 137 C cables accessory list 161 serial
Index connection list table, Bluetooth Controls 137 contrast control 30 Control Panel exploring 58 screen 30 Convert C39 to C32 65 Convert EAN-8 to EAN-13 Type 69 Convert to EAN13 76 Convert UPC-E to A 73 copying files 86 files, using ActiveSync 99–100 folders 86 information between programs 39 creating backup profiles, Total Recall 88 files 85 folders 84 partnerships 103 C32 Prefix 65 C39 Check Digit Verify 66 D data loss prevention 87 rates, 802.
Index Control Panel 30 Location Of Scanner 12 Location Of SIM Card And MMC 26 MMC insertion netpad Front and Back 11 Power Properties menus 17–24 Removal Of SIM 28 file attributes, changing 85 files 36, 81 changing attributes 85 copying 86 memory use 93 moving around 83 naming 85 navigating 35 opening 83, 84 viewing on disk 83 File Viewers 5 Firmware (TRX7441) 122 flash folder 87 Flight Mode Settings 24 Flow Control, Bluetooth radio 141 folders 81 closing 84 copying 86 flash 87 managing 86 moving around 83
Index K setting up 154 troubleshooting 178 MSI Check Digits 77 MSI Plessey 76 multimedia cards See MMC keyboard display 31 entering information 36 Input Panel 36 languages 36 Software Input Panel 31 keypad assignments 31 settings 30 N L LANAccessUsingPPP service, Bluetooth 133 languages, keyboard 36 Laser-On Time 63 LEAP 117 lithium-ion battery safety xx low temperature backlight setting 30 M magnetic fields 8 mailbox accounts 146 connecting through PC 146 connecting to remote by modem 145 Make New
Index Port Prefix, Bluetooth Controls 137 power CAM (Constantly Awake Mode) 117 FAST PSP (Fast Power Save Protocol) 117 management 14 MAX PSP (Maximum Power Save Protocol) 117 Power Properties menus 17–24 Power Save Mode 117 PSP (Power Save Protocol) 117 requirements 186 specifications 186 Power Properties 16 Power Save Mode (TRX7441 Cisco radio) 117 Power Scheme 19 Prefix Char 64 Printer (serial service), Bluetooth 133 printing, using PC 97 processor specifications 187 Profile Information Page 89 Profile L
Index instructions 34 laser duration 63 Laser-On Time 63 Options 61 Output 78 prefix character 64 removing characters 65 safety 34 Scan Indicator 61 Scan Result 61 Scan Result Time 61 suffix character 65 symbologies 63 Translations 78 Trigger (button choice) 63 warning message 61 Scanner Properties 60 Scan Result 61 Scan Result Time 61 Schemes (Power Properties) 18 screen caring for 6 overview 30 rotation 51 SDRAM 187 securing your information 59 serial cable 46 communications 43 port, powered 46 port locat
Index system memory, displaying 93 USS-128 67 T V tap-and-hold, stylus effect 29 TCP/IP, definition of 148 temperature range, netpad 185 text conventions 4 third party applications 8 time 52 TLS, IEEE 802.
