User manual

42 Psion Teklogix netpad Win CE 4.1 Quick Start Guide
To insert the netpad into the docking station, align the two devices,
and press down on the netpad until the connection is made. To eject,
press down on the release button at the top of the docking station.
The netpad will be pushed up and out of the docking station.
While the netpad is in the docking station, the communications port
on the netpad can still be used. The docking station communications
port is available for convenience.
You can rotate the orientation of the docking station on its stand.
Hold the top of the docking station in one hand and the bottom in the
other. Lift the top part to release it and rotate through 90°. When you
let go of the top part, it will click into place.
3.2 Communications Settings
When performing PC communications, it is necessary to define the
communication settings.
In the PC Connection icon in the Control Panel, verify that the
checkbox that allows connection to the desktop is checked.
• Serial Port 3 specifies using the RS232 communications port
on the netpad.
• Docking Station specifies using the RS232 communications
port on the docking station.
• Infrared Port specifies using the IR port on the back of
the netpad.
To change the connection type, click on the Change... button and
select the connection from the dropdown list.