User manual

30 Psion Teklogix netpad Win CE 4.1 Quick Start Guide
2.3 Turning On And Off
To switch on:
press the On/Off button on the top.
Note: If the serial cable is connected to the PC and the netpad, the
netpad will automatically switch on when ActiveSync on the
PC is searching for a connection.
To switch off:
press the On/Off button on the top. Press and hold to suspend
the netpad. You can switch off at any time. You do not have to
save your information first, as it is automatically saved for you.
However, if you are working with a file on the MMC, save the
file before switching off the netpad and removing the card.
Note: If you do not use the netpad, it will automatically switch off
after a few minutes to save battery power. To continue using
the netpad where you left off, switch the netpad on again
using the On/Off button. The power saving options are avail-
able via the Control Panel. The automatic switch-off time
may have different settings, depending on whether the netpad
is in the docking station or not. The automatic switch-off can
also be configured to suspend or turn off the display.