User manual

28 Psion Teklogix netpad Win CE 4.1 Quick Start Guide
Inserting The SIM Card
Warning: To prevent damage to the SIM card, ensure that the
netpad is switched off and the battery removed before
inserting the SIM card.
• Remove the battery pack from the netpad.
• Open the card slot door located on the side of the unit by slid-
ing the retaining latch.
• Push the SIM card into place until it is fully inserted. Note
the orientation of the card, shown in Figure 2.9, with the
notch of the card on the left, trailing side. Close the door.
Figure 2.9 Insertion Of SIM Card
Important: Ensure that the SIM card is inserted in the correct
orientation as shown. Once inserted, the SIM card
can only be removed using a pair of tweezers or long-
nosed pliers. If the SIM card is inserted incorrectly,
the unit will not connect to the GSM network.
If the SIM card is inserted incorrectly, it must be
removed by following the instructions on page 29:
“Removing The SIM Card”.
MMC
SIM Card
SIM Card Slot
Orientation of Card
(notched corner)