Specifications

Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide 27
Creating Uppercase Letters
To display a capital letter:
• Press the [ORANGE] key and then the [SHIFT] key before
typing the alpha character.
Choosing Multiple Characters From The Same Key
If you need to choose more than one alpha character from a single
key, you’ll need to press the ‘Accept’ key between alpha selections.
The ‘Accept’ key is presented as an arrow ⇒ symbol above the ‘0’
(zero) key.
For example, suppose you want to type the letters ‘a’, ‘b’ and ‘c’.
These letters are all accessible from the numeric key, [2].
To type the letter ‘a’:
• Press the [ORANGE] key, and press the numeric key, [2].
• Press the ‘Accept’ key [⇒] to indicate that the letter ‘a’
should be accepted and that another letter from the same key
will be chosen.
To type the letter ‘b’:
• Press the [2] key twice, and press [⇒] to accept the
letter ‘b’.
To type the letter ‘c’:
• Press the [2] key three times.
When you have completed your alpha selections from this key, you
can do one of the following:
• If you want to choose additional alpha characters from
another key(s), leave the [ORANGE] key ‘on’, and press the
numeric key with the alpha character you require, or
• If you do not want to choose any additional alpha characters,
press [ORANGE] again to unlock or turn ‘off’ the key and
end alpha selection.