User manual

Chapter 3: Getting To Know Your 7535/7530

Internal Scanners

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

However, external decoded scanners must be configured by scanning special configura-

tion bar codes. In these cases, the scanner manufacturer provides programming

manuals for configuration purposes.

• For Symbol decoded scanners, refer to the appropriate programming guide:

• P300.

• LS3408

• For Symbol non-decoded scanners, refer to the LS3200 Programming Guide.

• For Power Scan (PSC) decoded and non-decoded scanners, refer to the

Powerscan Programing Guide (PSC).

Scanner types include:

• Advanced Long Range – reads very large 1D bar codes (60 mil+) at very

long distances (up to 14m).

• Long Range – reads large 1D bar codes (55 mil) at long distances

(up to 3m).

• Wide Angle – reads large (or long) 1D bar codes (55 mil) at short distances

• High Performance – reads regular bar codes (5 - 55 mil) at medium dis-

tances (up to 1m).

• Short Range (SE923) – reads regular bar codes at short distances. This

scanner is included with an RFID reader in the combo RFID/laser option.

• RFID – is a short-range device that can read RFID tags within 1 cm. of the

hand-held scanner window. It supports the Sirit 13.56MHz RFID

reader/writer module and the Sirit 13.56MHz combo RFID reader/writer

laser bar code scanner module. These modules read the following RFID

tags: Phillips I-Code, Texas Instruments Tag-It, ISO-15693, Microchip

MCRF350 series, Inside Technologies PicoTag.

The bar code scanner reads the following bar codes: UPC/EAN, Code 128,

Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar and MSI Plessey.

• Fuzzy Logic – reads damaged or low contrast regular 1D bar codes (5 -

55mil) at medium distances (up to 1m).

• PDF Raster Laser – reads 2D PDF bar codes or regular bar codes at short to

medium distances.

• 2D Imager - reads regular 1D and all 2D bar codes at short to medium distances.