User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 53
Chapter 3: Getting To Know Your 7535/7530
Audio Indicators
Wireless WAN
These icons provide access to and information about the 7535/7530 GSM/GPRS
wide area networking status. Refer to “Wireless WAN” on page 202 for details
about each of these taskbar icons.
3.7.3 Audio Indicators
The beeper provides a variety of sounds and can be configured to emit a sound when
a key is pressed, a keyboard character is rejected, scan input is accepted or rejected,
an operator’s entry does not match in a match field or the battery is low. The volume
function keys are located in the top row of the keyboard. The increase volume key is
labelled with a plus symbol and the decrease volume function key is labelled
with a minus symbol .
3.7.3.1 Adjusting The Beeper Volume
On 58-key and 63-key keyboards, the volume function keys are accessed by
pressing <BLUE> <F5> and <F6>.
On 36-key and 37-key keyboards, the volume function keys are accessed by
pressing <BLUE> < F3> and <F4>.
To adjust the beeper volume:
• Press the <BLUE> key twice to lock the key ‘on’ and then, press the
increase volume function key or the decrease volume function
key until the volume meets your requirements.
• Remember to press the <BLUE> key again to turn it ‘off’.
3.8 Internal Scanners
Important: For detailed scanner specifications and decode zone tables, refer
to “Internal Scanner Specifications” beginning on page 353.
The 7535 and 7530 support a wide range of scanner options to address a variety of user
application requirements. The scanner installed in your unit can be configured using the
Scanner Properties dialog box in the Control Panel. External, non-decoded scanners
are also configured through the Control Panel.