User manual

Chapter 2: Basic Checkout

Configuring An IEEE 802.11 Radio In The Unit

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

4. Wireless Information Tab

The options under this tab display existing networks to which you can

connect, and it allows you to add a new network or modify the settings

for an existing network.

Note: Configure button – To change the settings in an existing network, high-

light the network you want to modify, and choose the Configure button to

display the Wireless Properties dialog box.

Connect button – To force connection to a specific, existing network,

highlight the network to which you want your 7535/7530 to connect, and

choose the Connect button.

Figure 2.8 Wireless Information Tab

This tab lists available networks – any access points that are broadcasting

an SSID, and it lists preferred networks – networks that you have config-

ured. Since access points are generally secure, they will most likely not

be listed here. By default, 7535/7530 attempts to connect to preferred net-

works. This behaviour can be changed by enabling Automatically connect

to non-preferred networks in the Advanced dialog box (page 30).

• To add a new configuration, tap on the Add New button. A blank Wire-

less Properties dialog box is displayed.