User manual

Chapter 2: Basic Checkout

Configuring An IEEE 802.11 Radio In The Unit

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

2.3 Configuring An IEEE 802.11 Radio In The Unit

The most common 802.11b settings are configured as defaults. However, there are

some fields that must be completed, including the SSID of your access point and the

security methods implemented in the network (including access keys).

Important: If the 7535/7530 is equipped with a radio that has never been con-

figured, the radio settings dialog box opens automatically when

the unit is powered on. In this case, skip to Step 4 on page 24.

To configure the 802.11b radio:

1. Tap on the Start button in the taskbar, and tap on Settings, Network

and Dial-up Connections.

If you’re using the keyboard, press <BLUE> 0 to display the Start

Menu. Use the <DOWN> arrow key to highlight Settings. Press the

<RIGHT> arrow key to display the sub-menu. Highlight Network, and

press <ENTER>.

Figure 2.5 Network And Dial-Up Connections

Note: You can also press <CTRL> <0> to display the Start Menu.