User manual

Chapter 2: Basic Checkout

Attaching Carrying Accessories

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Regarding battery calibration, keep in mind that all types of

battery chargers available for the 7535 contain single discharge

circuits so that only one battery can be calibrated at a time (a cal-

ibration cycle requires discharging the battery and then calibrat-

ing to the new full charge). If multiple batteries require

calibration, care should be taken to ensure that these batteries are

placed into a charger that is not already calibrating a battery.

2.1.3 Attaching Carrying Accessories

Psion Teklogix recommends that a carrying accessory – a hand strap, pistol grip or

shoulder strap – be installed on the 7535/7530 before use. If your hand-held is not

fitted with a hand strap or pistol grip, you can install either using the carrying

accessory kit supplied. You’ll need:

• A Phillips head screwdriver.

Important: Do not use adhesives such as Loctite to secure screws on carrying

accessories. These chemicals may damage the plastic casing.

2.1.3.1 Attaching The Hand Strap

Two Phillips head screws are provided with the hand strap.

• Attach the strap to the two threaded inserts located at the back of the

7535/7530 near the top of the unit.

Figure 2.1 Attaching The Hand Strap