User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 343
Chapter 7: Peripheral Devices & Accessories
The Port Replicator
7.11.7 The Port Replicator
The port replicator is an optional accessory that allows tethered devices (e.g.,
scanners) as well as mounted peripherals (e.g., bar code printers or weigh scales) to
be attached to the picker cradle. The replicator can be used with or without the
cradle power option.
The functionality of the 7535/7530 tether port is duplicated on the port replicator. In
addition to the tether port, the replicator is equipped with a standard 9 pin RS232D
serial interface. This interface is typically used for fixed peripherals such as printers.
Your serial device likely includes a suitable cable connector for this port.
Note: The 7535/7530 picker cradle can be ordered with the port replicator
option installed, or it can be retrofitted later by an authorized Psion Tek-
logix service depot. Service offices are listed in Appendix A: Support Ser-
vices And Worldwide Offices.