User manual

Chapter 6: Tekterm Application
Emulation
304
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
BRK for Attn
When the attention key is pressed, a Telnet “Break” command is generated. This
command is sent to the host in place of the standard mechanism used to send the
attention key press to a host using Telnet.
LU Name Enabled
If enabled (set to ‘Y’), this parameter allows the 7535/7530 to negotiate a specific
device name for itself.
LU Name
The value assigned in this field is used when the “LU Name Enabled” parameter
(see above) is set to ‘Y’. The current terminal number is appended to the name to
generate a unique device name (for example, LUA00001).
Features – 3274/Telnet
These parameters are identical to those described for 2392/Telnet. Refer to
“Features – 2392/Telnet” beginning on page 301.
Clear Entry Fields N Y/N
Passthru Printing N Y/N
AIAG Character 0 0-255
Barcode Character 0 0-255
Serial IO Character 0 0-255
Fixed Field Ovrhd 5 0-80
Enable Alarm N Y/N
Command Region Up 0 0-24
Command Region Down 0 0-24
Command Region Left 0 0-80
Command Region Right 0 0-80
06
Features
Range