User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 301

Chapter 6: Tekterm Application

Emulation

Features – 2392/Telnet

Clear Entry Fields

When this parameter is set to ‘Y’, an empty entry field is created in place of an entry

field filled with spaces.

Note: This operation is only performed on screens received from the host. Data

sent to the host remains unaffected.

Passthru Printing

Setting this parameter to ‘Y’ allows the host to send data directly to the 7535/7530

serial port. This option is most commonly used for printing.

AIAG Character

This parameter is used to enter a decimal representation of the ASCII character code

of the AIAG character. A value of 0 (zero) disables this feature.

When a bar code data is scanned, the 7535/7530 searches for AIAG fields on the

current page that can accept the bar code data. The application program

distinguishes an entry field as AIAG by preceding the field with this special mode

character which indicates the existence of AIAG fields.

Barcode Character

Barcode-input-only fields are special entry fields that only accept input from a bar

code reader. The application program identifies a barcode-input-only entry field by

preceding the field with a special character.

Clear Entry Fields N Y/N

Passthru Printing N Y/N

AIAG Character 0 0-255

Barcode Character 0 0-255

Serial IO Character 0 0-255

Fixed Field Ovrhd 5 0-80

Enable Alarm N Y/N

Command Region Up 0 0-24

Command Region Down 0 0-24

Command Region Left 0 0-80

Command Region Right0 0-80

Features

Range