User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 291

Chapter 6: Tekterm Application

Tests

H Match Chr

This parameter enables hidden field matching and defines the character that identifies

hidden field match data from the host. Field matching allows the host to pre-load

data into an entry field that is compared with the user’s input. The 7535/7530 beeps

if the entered data does not match. Hidden field matching means that the data to be

matched is not displayed in the entry field.

Enter the decimal value for the ASCII character that will be used by the host to

identify hidden match field data. Enter 0 (zero) to disable this feature.

Note: Another method of field matching is available directly through the

TESS data stream.

Fill Chr

This parameter specifies the character that identifies empty entry fields. Enter

the ASCII decimal equivalent of this character. The most commonly used

characters are:

_ (underline) Enter 95

. (period) Enter 46

Note: 7535/7530s in some systems may use the “space” character with the host

using reverse video attributes to mark entry fields.

Upper Case

When this parameter is enabled (set to “Y”), lowercase input is converted

to uppercase.

6.19.2.4 Tests

AutoRep Fn

This parameter determines which function key is sent to the host in auto reply mode.

The value represents the number of the function key – not the ASCII decimal

equivalent. After sending this key, the unit locks and waits for the host to unlock the

7535/7530. To disable “AutoRep Fn”, set the “AutoRep T/O” parameter to zero.

AutoRep Fn 7 0..63

AutoRep T/O 5 0..255

Tests

Range