User manual

Chapter 6: Tekterm Application

Characters

290

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Char Set

This menu contains all the character sets available with your Psion Teklogix

computer. In this menu, the “Y” or “N” is used to visually guide you to the selected

character set. For example, in the sample menu above, the “Y” next to IBM

indicates that a character set has been chosen from this group.

To choose a character set:

• Position the cursor on the appropriate item – for example, ISO – and press

<F1> to display the character set options.

• To activate a character set, press the <RIGHT> or <LEFT> arrow key to set

it to “Y”.

Important: If you choose a Chinese character set from the ‘Misc.’ menu and

a character sent from the host cannot be displayed on the

7535/7530 screen, a shaded box character is used as a substitute.

Please review “Default font” on page 299.

If you are using a Korean character set, a right arrow character is

used as a substitute.

V Match Chr

This parameter enables visible field matching and defines the character that identifies

visible field match data from the host. Field matching allows the host to pre-load

data into an entry field that is compared with the user’s input. The hand-held beeps if

the entered data does not match. Visible field matching means that the data to be

matched is displayed in the entry field.

Enter the decimal value for the ASCII character that will be used by the host to

identify visible match field data. Enter 0 (zero) to disable this feature.

Note: Another method of field matching is available directly through the

TESS data stream.

ISO N »

IBM Y »

DEC N »

Misc. N »

Char Set