User manual

Chapter 6: Tekterm Application
Kbd Modes
280
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
6.19.1.4 Kbd Modes
Arrow mode
This parameter determines whether arrow keys move the cursor within a field or
between fields. When set to “field”, pressing an arrow key causes the cursor to
move to the next field in the direction of the arrow. When set to “cursor”, pressing
the <LEFT> and <RIGHT> arrow keys move the cursor within the current field.
Echo Mode
This parameter selects echo mode for the 7535/7530. The available modes are
“Local”, “Host”, and “Smart”.
Local: In this mode, any character entered using the keyboard is displayed
before being sent to the host. Certain keys cause additional action
at the 7535/7530, as shown in Table 6.4 on page 281.
Host: In this mode, the hand-held computer sends all keyboard entries to
the host and displays only data received from the host.
Smart: This mode reduces or eliminates the delay between typing a
character on the keyboard and displaying the character echoed by
the host computer. The 7535/7530 displays all printable characters
on the screen before sending them to the host. The hand-held com-
pares the characters echoed by the host to the characters placed on
the page and fixes the display if the host echoes are different.
The maximum number of characters waiting for echo is 25.
Any additional characters are sent to the host but not displayed.
When the 7535/7530 is in insert mode, smart echo is disabled.
Arrow mode cursor cursor, field
Echo mode Smart Smart, Local, Host
DEL key DEL DEL, BS, Clear
BKSP key BS BS, Clear, DEL
PrintScreen key 16 1..255
Xmit Enter Y Y/N
Insert N Y/N
Newline N Y/N
Disable kbd N Y/N
DEC Cursor Keys cursor mode see text
05
Kbd Modes
Range