User manual

Chapter 6: Tekterm Application

Xmit Modes

276

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Colour Override

Note: If you are using a 7535 equipped with a monochrome display, this menu is

not available.

Foreground And Background

When “Colour Override” is set to ‘Y’, the colours chosen in this menu are displayed

in the ANSI sessions. These colour settings will override the “Default Colours” set

from within the “View Manager” menu. Refer to “Default Colours” on page 266 for

details.

The allowable values are:

Red, Green, Yellow, Blue, Magenta, Cyan, White

and

Black.

6.19.1.3 Xmit Modes

Xmit Count

This parameter determines how many characters from the keyboard or scanner are

buffered by the 7535/7530 before being transmitted to the host. If 0 (zero) is

selected, the hand-held transmits only according to the “Xmit Wait” parameter. If

the ANSI block mode features are used, this parameter should be set to 99.

Note: If the 7535/7530 is not in local edit mode, the <ENTER>, arrow,

<CTRL>, and function keys cause an immediate radio transmission

regardless of the “Xmit Count” parameter setting.

Foreground Black see text

Background White see text

Colour Override

Range

Xmit Count 99 0..99

Xmit Wait 1 0..999

Dev Attr [ ? 62 ; 1 ; 2 ; 6 c see text

Auto-Answer see text

7 bit Y Y/N

Block Mode » see text

Xmit Modes

Range