User manual

Chapter 6: Tekterm Application
Screen
274
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
# of Cols
This parameter defines the logical page width (in characters) used by the host
computer application. Emulator systems trim the host application screens to this
width. This page width cannot be smaller than the width of the display. Display
panning is used if the page is wider than the display.
Note: The value in this parameter must be an even number.
Default font
This parameter determines the default font that appears when the 7535/7530
memory is reset.
• Use the <RIGHT> or <LEFT> arrow key to scroll through the available
options.
80-col. font & 132-col. font
These parameters are used to set the font size on the screen if the default font is not
acceptable. An escape sequence must be sent from the host before a hand-held can
switch to either
80-col. font or 132-col. font.
• Use the <RIGHT> or <LEFT> arrow keys to scroll through the size options
for these parameters.
Video
The possible attributes for these parameters are: “BLNK” (blink), “ULIN”
(underline), “REV” (reverse), and “NONE” (normal).
Bold
This parameter specifies the actual video attributes to be assigned to fields created
with the “Bold” ANSI attribute.
Bold NONE see text
Blink BLNK see text
Reverse REV see text
Underline ULIN see text
06
Video Range