User manual

Chapter 6: Tekterm Application
Displaying The Unicode™ Pop-up Window
266
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
To close the pop-up menu when you’re done:
•Press the <ESC> key.
Font Override
This parameter is used to redefine the font to which 5 different font codes refer.
Default Colours
Foreground And Background
This menu is used to select the foreground and background colours used within
Tekterm. If an unreadable combination is assigned – the foreground and background
have the same value – the foreground colour will be inverted.
The allowable values are: Red, Green, Yellow, Blue, Magenta, Cyan, White
and Black.
Note: The 7535/7530 must be reset – press and hold down the <BLUE> and
<ENTER> keys for a minimum of six seconds – in order for the new
colour assignments to take affect.
Font Code 0
... is font 18x32
Font Code 1
... is font 18x32
Font Code 2
... is font 10x26
Font Code 3
... is font 18x32
Font Code 4
... is font 8x20
Font Override
04
Foreground Black see text
Background White see text
04
Default Colours
Range