User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 265
Chapter 6: Tekterm Application
Displaying The Unicode™ Pop-up Window
• Press the <LEFT> or <RIGHT> arrow keys until the character set you want
to use is displayed.
You can create up to 20 Unicode™ characters in the custom characters table.
To create a Unicode™ value:
• Replace the 0000 value with a hex value that represents the Unicode™
character you want to use.
• Press the <DOWN> arrow key to accept the value and move the cursor to
the next field.
When you have finished creating the Unicode™ characters you want to use:
• Press <F4> to save your changes.
• Reset the 7535/7530 – press and hold down the <ENTER> and <BLUE>
key simultaneously for a minimum of six seconds.
6.18.2.2 Displaying The Unicode™ Pop-up Window
The Unicode™ values you create are stored in a pop-up window that you can access
from any application.
To display the pop-up window within any application:
• Press <CTRL> <ALT> <A>.
Note: Unicode™ characters that cannot be displayed on your screen with the
font you are currently using are displayed as rectangles in the pop-up
window. (See the sample menu on page 266.) However, the actual Uni-
code™ value you created will be sent to the host.
• Use the <LEFT> or <RIGHT> arrow key to position the cursor on the
Unicode™ value you want to use, and press <ENTER>.
Select item with arrow keys.
Press ENTER when done.
Press ESC to cancel.