User manual

Chapter 6: Tekterm Application
Radio Parameters
252
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Warning: Parameters should not be altered without a clear understanding of
how they operate. Parameters that are incorrectly set can increase
response time or cause communication difficulties. Generally,
parameters are configured for each site during installation.
Note: Parameters can also be remotely modified using SNMP. Refer to “SNMP
(Simple Network Management Protocol) Setup” on page 194 for details.
• At the startup ‘Display’ menu, type ‘a’ to display the ‘Parameters’ menu.
To open the ‘More Parameters’ menu:
• Double-tap on ‘More Parameters’ or press <F1>.
6.15 Radio Parameters
Important: Radio parameters should not be changed from their factory
settings without a clear understanding of your system.
Note: A Narrow Band radio is available for 7530 hand-held. For details on set-
ting up this radio, refer to “Narrow Band Radio Setup — 7530 Only” on
page 137.
For 7535/7530s equipped with 802.11 radios, follow the directions following.
More Parameters » see page 251
Security Supervisor see page 250
Display » see page 251
01
Parameters
Range
Radio »
System »
Scanner Ctrl Panel »
View Manager »
Applications »
Ports »
Network »
02
Parameters