User manual

Chapter 6: Tekterm Application
The Parameters Menu
250
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card are preserved. When the
7535/7530 is reset, the screen displays the Psion Teklogix and Microsoft®
Windows® CE .NET splash screen before displaying the startup desktop.
6.12 The Parameters Menu
• At the ‘Display’ menu, type ‘a’ to display the Parameters menu.
The “Parameters” menu allows you to adjust the screen contrast and select a security
level. With a Supervisory or Teklogix password, you can also access the parameters
listed in the “More Parameters” sub-menu.
6.12.1 Security Settings
To access the “More Parameters” sub-menus, the “Security” parameter must be set to
either a Supervisor or a Teklogix level password. The default security level is User.
To display the Security Level dialog box:
• Double-tap on the “Security” parameter, or
• Press <F1>.
Important: Refer to “Security Settings” on page 74 for details.
More Parameters » see page 251
Security User see page 250
Display » see page 251
01
Parameters
Range