User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 249
Chapter 6: Tekterm Application
String Entry Parameters
6.10.2.5 String Entry Parameters
You’ll need to use the keyboard to enter values in string entry fields. Refer to “String
Entry Parameters” on page 245 for details.
6.10.3 Saving Changes To Parameters
Whenever a parameter value is altered, the new value must be saved. To do this:
• Press <F4> – the “SAVE” key.
If you are using a touchscreen:
• Tap the stylus on the “SAVE” softkey label.
• If the softkey labels are not visible, you’ll have to press <F4> – the “SAVE”
function key.
If a parameter value is changed and the menu exited before the change is saved, a
dialog box appears asking whether or not the operator wants to save the changes.
6.10.4 Retrieving Default Parameter Values
Important: When <F3> – the DEFAULT key – is pressed, all parameter
values revert to the factory defaults, including those values that
you’ve changed and saved.
• Press <F3> – the “DEFAULT” function key, or tap the stylus on the
“DEFAULT” softkey label – to reinstate the default parameter values.
• Press <F4> – the “SAVE” function key, or tap the stylus on the “SAVE”
softkey label – to save the changes.
• Reset the 7535/7530. See “Resetting The 7535/7530 Hand-Held Computer”
in the next section.
6.11 Resetting The 7535/7530 Hand-Held Computer
Some parameter adjustments require that the 7535/7530 be reset before the changes
can take effect. To reset the 7535/7530:
• Press and hold down the <BLUE> key and the <ENTER/ON> key simulta-
neously until all LEDs illuminate yellow (approximately six seconds).