User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 243
Chapter 6: Tekterm Application
The Tekterm Startup Display Menu
• Q memory address of first message in receive queue (i.e. if
0 then the receive queue is empty).
• AcQ number of messages that have been sent but not yet
acknowledged by the Cellular Master (decimal).
• TxQ number of messages waiting to be sent (decimal).
6.9 The Tekterm Startup Display Menu
The values assigned to Tekterm parameters can be viewed and adjusted to optimize
communication at the site in which a 7535/7530 is operating. While some
parameters are accessible through the “Parameter Manager”, others can be adjusted
through the Windows CE .NET Control Panel. This section provides a description
of all parameters and how to adjust them.
• Press <CTRL> <ALT> <0> (zero) to work with the ‘Display’ menu.
From this startup menu, you can launch the “Parameters” menu along with TESS
and/or ANSI sessions. You can also display the Radio Statistics screen.
Note: Aside from the ‘Parameters’ menu, all other applications listed in the
‘Display Menu’ are created in the ‘Applications’ menu. Refer to “Appli-
cations” on page 267 for details.
To launch an application, either type the letter to the left of the application you want
to use, or tap the stylus on the item.
For example, to display the “Parameters” menu:
• Type the letter ‘a’, or
• Tap the stylus on the “Parameters” item.
Note: To return to the ‘Display Menu’, press <F2> – the ‘Previous’ key.
A Parameters
B TESS
C ANSI
01 Display