User manual

Chapter 6: Tekterm Application
Macro Keys
224
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Note: The SAVE onscreen label only appears when a parameter value has
been changed and has not yet been saved.
6.2.2 Macro Keys
Important: Refer to “Keyboard Macro Keys” on page 101 for details about
creating macros.
7535/7530 hand-helds are equipped with a series of macro keys that can be
programmed to replace frequently used keystrokes, along with the function of
executable keys like the <ENTER> key, the <BKSP> key, any function key and
arrow key, and so on.
Alphanumeric Keyboard Macro Keys
Alphanumeric keyboards (7535 58-key and 7530 63-key) have twelve macro keys –
<M1> to <M12>. These keys are colour coded in orange print above alpha keys
<O> to <Z>.
To access a macro key:
• Press the <ORANGE> key followed by the appropriate alpha key from
O to Z. For example:
To access macro key <M1>, press <ORANGE> <O>.
To access macro key <M2>, press <ORANGE> <P>, and so on.
Numeric Keyboard Macro Keys
Numeric keyboards (36-key 7535s and 37-key 7530s) are equipped with six macro
keys – <M1> to <M6>. Macro keys <M1> to <M2> are directly accessible in the
bottom row of the keyboard – a key combination is not required.
Macro keys <M3> and <M4> are colour coded in orange print above macro keys
<M1> and <M2>.
• To access <M3>, press the <ORANGE> key followed by <M1>
• To access <M4>, press <ORANGE> <M2>.
Macro keys <M5> to <M6> are colour coded in blue print above macro keys <M1>
and <M2>.
• To access <M5>, press the <BLUE> key followed by <M1>.
• To access <M6>, press <BLUE> <M2>.