User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 205
Chapter 5: Configuration
Disconnecting From A Network
When the connection state reaches PPP link to modem active, the taskbar icon changes
to indicate an active connection. The Connect Data button changes to Disconnect.
Figure 5.99 Connection Established
5.12.3 Disconnecting From A Network
To disconnect from the network:
• Tap the stylus on the Disconnect button, and then on OK.
When the 7535/7530 network connection is severed, the Status field displays Ready
to connect.
A unit equipped with a GSM/GPRS expansion board displays the signal strength in
the main Wireless WAN screen, even while a connection is active. Units equipped
with Sierra Wireless Aircard modems do not display the signal strength while a
connection is active. The Rx bytes and Tx bytes fields estimate the amount of data
transmitted and received, respectively.
5.12.3.1 Shutting Down The Wireless WAN User Interface
While it is not usual to shut down the GSM/GPRS user interface, you can
accomplish this by tapping on the File menu and choosing the Exit command at the
bottom of the main Wireless WAN dialog box
Note: Once you’ve shut down the user interface, you can only enable the radio
by opening the Control Panel and tapping on the Wireless WAN icon to
display the Wireless WAN dialog box.