User manual

Chapter 5: Configuration
Code 11
160
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Field Size/Chars
Refer to the description beginning on page 154 for details.
5.10.2.10 Code 11
Enabled
Set this parameter to on to enable “Code 11”.
Include Check
If “Include Check” is enabled, the check digit is included with the decoded bar
code data.
Check Digit
This parameter can be set to None, One Check Digit or Two Check Digits.
• Double-tap on this parameter to display a dialog box listing your options.
• Highlight the check digit you want to use, and tap on OK.
If this parameter set to One Check Digit, it is assumed that the last digit is a
check digit.
If this parameter is set to Two Check Digits, it is assumed that the last two digits are
check digits.
Field Size/Chars
Refer to the description beginning on page 154 for details.
5.10.2.11 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Mod 10 Check
If this parameter is enabled, the “Mod 10” check digit is calculated. This calculation
is the same as the Code 39 Mod 10 check digit.
ITF Check
If this parameter is enabled, the ITF-14/16 Mod10 check digit is calculated.