User manual

Chapter 5: Configuration

EAN 8

158

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Strip Trailing

The value entered in this parameter determines the number of characters that will be

removed from the end of the bar code before the suffix character is added.

5.10.2.5 EAN 8

Enabled

Set this parameter to on to enable “EAN 8” or off to disable it.

Include Check

If this parameter is enabled, the check digit is included with the decoded bar

code data.

Addendum

Important: Before “Addendum” can take effect, the “Short Code” parameter

(see page 153) must be enabled.

Refer to “Addendum” on page 157.

Prefix/Suffix

See “Prefix/Suffix” beginning on page 157.

5.10.2.6 UPC A

Enabled

Set this parameter to on to enable “UPC A”.

Include Number Sys

If this parameter is enabled, the number system digit is included with the decoded