User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 151
Chapter 5: Configuration
Bar Codes
The Scanner
The dropdown menu to the right of the Scanner option allows you to choose from one
of the following scanner types used with your hand-held: Non-decoded, Decoded
(internal), Decoded (Intermec ISCP), Imager and Decoded (external).
The symbologies listed in the Barcodes tab change to reflect the scanner you choose and
the bar codes it supports.
Important: To improve the decode speed and performance, enable (set to
‘on’) only those codes that are required by the application.
Keep in mind that some bar code types are only available when an internal imaging
scanner is installed. All internal scanners can be configured using these dialog
boxes. External, non-decoded scanners are also configured through the Scanner
Properties dialog box.
However, external decoded scanners must be configured by scanning special
configuration bar codes. In these cases, the scanner manufacturer provides
programming manuals for configuration purposes.
• For Symbol decoded scanners, refer to the appropriate programming guide:
• P300, or
• LS3408.
• For Symbol non-decoded scanners, refer to:
• LS3200 Programming Guide.
• For Power Scan (PSC) decoded and non-decoded scanners, refer to:
• Powerscan Programing Guide (PSC).