User manual

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 147
Chapter 5: Configuration
Radio Tab
Enable Power Saving
When this parameter is checked, power saving is enabled.
Idle Poll Limit
Note: The “Idle Poll Limit” parameter is only used when “Enable Power Sav-
ing” is enabled.
This parameter determines how many transmit opportunities – base station polls
with available response windows – must be consecutively skipped before the 7530
places the radio into power-down mode for power saving. The allowable range for
this parameter is from 1 to 200. The default value is 10.
Lower values cause the hand-held to enter power saving mode quickly, extending
battery life but reducing 7530 responsiveness. Higher values increase
responsiveness but decrease battery life.
Power Off Time
This parameter determines the amount of time (in seconds) the 7530 radio stays in
power-down mode when a power down period has been initiated. “Power Off Time”
is only used when the “Enable Power Saving” parameter is enabled.
The allowable range for this parameter is 1 to 60.
5.9.5 Radio Tab
Figure 5.70 Radio Tab