User manual

Chapter 5: Configuration
Channel Tab
140
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Default All Parameters
• Tap on the Default all Parameters button to return all registry parameters
to default values.
When this button is pressed, a screen appears asking if you’re sure you want to
return all parameters to their default values.
• Tap on the Ye s button to return values to their default settings.
Note: This button does not default the radio parameters set under the Radio tab.
5.9.2 Channel Tab
Figure 5.64 Channel Tab
Channel Number
This parameter determines the operating radio channel of the 7530 The allowable
range for this parameter is
1 to 20. The default value is 1.
Note: The Channel Number dropdown menu displays only the channels that
have been enabled in the Channel Enable List.