User manual

Chapter 5: Configuration
The Servers Tab
120
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
If the 7535/7530 attempts to connect to a remote device that has Authentication
enabled and does not have a required PIN set, an Authentication Request dialog
box appears.
• Enter the PIN, and tap on OK to connect the devices.
5.6.2 The Servers Tab
Figure 5.33 The Server Tab
The Bluetooth connection is initiated from your 7535/7530 to the remote device –
therefore the 7535/7530 is called the ‘client’ and the remote is called the ‘server’.
The Servers tab displays the server profiles that can be activated in your 7535/7530.
There is currently one server profile available: Serial.
• Tap on the checkbox to activate the server, and it will display the
associated port name beside the server name.
Once you activate a server profile, it is recommended that the 7535/7530 be
rebooted before you try to bond from a server.
Note: You do not need to reboot if you are deactivating a server.