User manual

Chapter 5: Configuration
Display Backlight
96
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
•In the Display Properties dialog box, open the Backlight tab.
Figure 5.4 Display Backlight Properties
Note: Backlight changes take affect immediately. You do not need to reset
the unit.
ON Threshold
The 7535/7530 is equipped with an ambient light sensor. This sliding bar allows you
to determine how dark the ambient light needs to be before the backlight turns on.
Intensity
This parameter is used to adjust the light intensity of the 7535/7530 backlight.
Sliding the bar to the left lowers the light intensity, and sliding it to the right raises
the intensity.
Bright For
The value chosen from this dropdown menu determines the duration of time that the
backlight stays on at the configured intensity when a unit is not in use.
Dim For
The value chosen from this dropdown menu determines the duration of time that
the backlight stays on at half the configured intensity (dimmed backlight) when a
unit is not in use.