User manual

Chapter 4: Working With Windows CE

Using A Dialog Box

Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Note: This menu varies slightly depending on the security level chosen. When

the 7535/7530 is set to User level, the Shutdown option is replaced by

Suspend. A sub-menu is not available.

At Teklogix security level, an additional option is available in the

sub-menu – Bootloader. This option behaves like cold-reset, except

that the 7535/7530 starts Bootloader rather than Windows CE .NET.

Suspend

The Suspend option suspends the 7535/7530 immediately – this is equivalent to

turning the hand-held off.

Warm Reset

The Warm Reset option resets the 7535/7530, leaving all saved files and (registry)

settings intact. Any unsaved data is lost.

Cold Reset

The Cold Reset option resets the 7535/7530. Any files not stored in permanent

memory are lost; however, the registry settings are saved.

4.5 Using A Dialog Box

A dialog box (like the samples in Figure 4.16) appears when you need to make

selections and enter further information.

You can move between dialog items by tapping on them with your stylus (provided

your unit is equipped with a touchscreen), or by pressing the arrow keys and the

<TAB> key. (<SHIFT> <TAB> moves the cursor backwards.)