Hardware reference guide

Chapter 5: Reinstalling The OS

USB Download

Upgrading The Software Image

7535 Hardware Reference Guide

Once the Removable Disk has been properly stopped on the PC, the

BooSt Console displays a message similar to the following:

nand0-0 mounted: size = 16220160 (31680 * 512)

The flash memory containing the operating-system image has been

disconnected from the development computer and is now accessible by

the bootloader. The regular bootloader commands (1 and !) to load and

run the main operating system now work.

6. Reboot the 7535 by selecting option 1, “Run Main OS”, from the boot-

loader menu. The device boots into the new operating system.

Note: You may need to reconfigure any changes done to the system configura-

tion through the Control Panel. The registry will be set to default values if

the new OS determines that the previously-existing registry values are not

compatible.